Search results

I'm looking for 3 of these riser cards for my homelab Supermicro servers. Supermicro AOC-2UR68-i2XS

I rescued an old Dell S4810 switch from the recycle bin. Just the switch. No transceivers. I haven't had any experience with fiber tech up to this point. The Dell S4810 has 48 10GbE SFP+ ports. The S4810 spec sheet (see attached) shows support for SFP+, 10GbE, SR, 850nm, 300m transceiver...

According to this page; https://www.arista.com/en/support/advisories-notices/end-of-support/16112-end-of-software-support-7050x2 4.28.xx is supported on 7050TX-64 Can someone share 4.28.6m? I think that's the latest in the 4.28 release train, right? Thank you

Good point. I've installed smartmontools from whatever comes out of the CentOS Stream 8 repos. The server that I was using as a testbed for the initial sanity checks of this drive is still running an aging CentOS Stream 8. I suppose I need to update it to Stream 9 one of these days.

Answering my own question.... I think I found a solution. I installed the smartmontools package. Now smartctl seems to report the desired information. smartctl -a /dev/sg2 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.18.0-408.el8.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen...

I've got a Seagate disk drive model ST1200MM0088 - 1.2 TB 10K rpm 2.5 in 12Gbps SAS How can I display the device power on hours (poh) of this drive? smartctl doesn't seem to show that information. Here is what smartctl does show; smartctl --all /dev/sg2 smartctl 7.1 2020-04-05 r5049...