Search results

I use jperf it is a graphical front end to iperf enabling jumbos at 4088b on the cable creations 2.5G adapter driver 10.3920518 resulted in full speed with the ECS2512FP set to 9014b and my 10g workstation set to 4088b same speed in both directions! The ECS2512FP is working great with the...

Guys I just tested the Wiitek SFP+ to RJ45 Copper module with the EnGenius ECS2512FP Multi-Gigabit 2.5GbE PoE++ switch and it is working well I did a blog post here Convert a SFP+ Port To Copper Multi-Gig 2.5/5/10Gbps with a 10Gbase-T Adapter – Keenan Systems Wi-Fi

[ The Ubiquiti switch is weak only 4 ports unknown PoE budget (spec says 210w PS with 60W per port does not add up) no cloud management no support and typical UBNT bad quality.

Yes I am running the R750 on the ECS2512FP and it is working great these switches only do 2.5Gb but that is more than enough speed for any Wi-Fi 6 AP.

Guys I just got in the EnGenius ECS2512FP Multi-Gigabit 2.5GbE PoE++ switch these work great with the ECW230 4x4 Wi-Fi 6 ap and also the EWS377AP I did a review here with speed testing EnGenius ECS2512FP Multi-Gigabit 2.5GbE PoE++ Switch Review – Keenan Systems Wi-Fi

It is because of Wi-Fi 6 AP's like the EWS377AP they can saturate 1Gb links and business do not want to re cable it is the most expensive part of the Wi-Fi install. 2.5Gb will run over cat 5e at the same distances.

Guys I have also been testing the EWS377AP and the cloud managed version the ECW230 see my blog posts here Keenan Systems Wi-Fi Blog – Keenan Systems Wi-Fi EnGenius is coming out with one of the best priced 2.5G PoE switches to go along with their Wi-Fi 6 AP's they will also provide...