Is there any light for cheap switches 200GbE or 400GbE on the ebay or other sources with used HW ?
What will be the future - better to switch from 100GbE into 200 or 400 ?
or... still using 2x 100GbE LACP ;) on ConnectX-4 PCIE 3.0 or ConnectX-5 PCIE 4.0?
Since a while I am using HP DL580 G9 DDR4 and G8(+) DDR3 both with 8894 v4 CPU's (replaced from E7 8895 v2), but recently I found nice "old" (~3 years old) server - the X3950 X6 - eight CPU, and bought it.
And like always thinking about overclocking it :)
I have made some testing, mostly using...
Hello,
Just bought super old used HP DL580 Gen9 with 4x E7-8894 v4 CPU (thought next server will be 2xEpyc,but when realized Gen9 is cheaper than my laptop just bought it ;))
I need to upgrade RAM to 512GB or 1TB (It will be C++ builder machine, replacing 60core DL580 Gen8 8895 v2 / 1TB DDR3)...
I am wondering if is it possible for "flash" Mellanox MCX516A-CCAT to MCX516A-CDAT ?
Are ConnectX-5 and ConnectX-5 Ex based on the same chip and electronic board and PCIe 4.0 support is only the software thing?
or better to not try it - and there is a big (or even 100%) risk having small green...
56GbE is working fine on Mellanox coper cable - now it's time to bring it into reality
To use it, I need switch (probably it will be Mellanox SX6036), but first I need FDR transceivers for LC-LC fiber cables and.... I found 0 (only for MPO :/)
do you know some models that are more "cost...
I need your help :)
I am trying to run 56GbE on super old Mellanox Connect-X 3 353A cards flashed to 353A-FCBT firmware.
Is it any method to list "supported link modes" and "advertised link modes" on Windows 10 ?
something like "ethtool" from Linux ?
I need to find working cables (in my box...
I have an unexpected problem with Celestica DX010, I just (few days ago) start the new company network and realized that I don't have link with 100GbE cards at 100GbE speed, 40GbE is working fine (with Mellanox ConnectX-4 100GbE and Mellanox ConnectX-3 40GbE cards), but 100 isn't. Autoneg is not...
I need to buy 2 routers (preferably identical) in next 2 months for the office use. And I need >> SPEED << ;) (number of devices connected will be ~80, probably 2-4 will need bandwidth at the same time)
I have tested some, to understand how it works and what is the limit but now Wi-Fi 6E is...
Hello,
I bought some time ago Celestica DX010, and I need your help with L2 configuration. I have install SONiC on it - this was quite easy, switch looks like it's working (green lights when connected with 100GbE equipment, also after changing port speed to 40GbE it's looks like connected with...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.