So I picked up 8 SanDisk Ultra SD cards from Amazon, 2 for each of my 4 M620 blade servers, and everything works fine when the internal dual SD module is set for Redundancy disabled, however, if I enable redundancy, populate the second SD card slot, and then press "Y" to rebuild the redundancy when the system POSTs, the entire thing goes to shit. Meaning, either both SD cards just become completely invisible to the system or SD1 module goes to "failed" status and SD2 goes to "offline".
Very weird behavior, I wonder if somehow the SD cards are the issue here as I've read that things under the hood other than advertised size need to be 100% the same. I could test the theory I guess by just getting Dell SD cards off fleabay or trying Samsung EVO microSD cards with SD card adapters.
I've updated the firmware on the modules and this behavior is the same on all 4 blades. Anyone ever had a similar problem on the rack or blade servers?
Very weird behavior, I wonder if somehow the SD cards are the issue here as I've read that things under the hood other than advertised size need to be 100% the same. I could test the theory I guess by just getting Dell SD cards off fleabay or trying Samsung EVO microSD cards with SD card adapters.
I've updated the firmware on the modules and this behavior is the same on all 4 blades. Anyone ever had a similar problem on the rack or blade servers?