I was just browsing this earlier today: Planning Proxmox VE 5.1: Ceph Luminous, Kernel 4.13, latest ZFS, LXC 2.1
Pretty cool! New ZFS (0.7.x) and Ceph LTS.
Pretty cool! New ZFS (0.7.x) and Ceph LTS.
Proxmox VE 5.1 Updates
- Thread starter Patrick
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
I haven't messed with Ceph but is there any way to roll back to a previous version after updating Proxmox if it does end up breaking something?
anyone went into this ?
a bit scary it isn't resolved yet and nobody seems to have an idea whats going on there, especially as i planned upgrading my cluster dem 4.x to 5 during the next weeks.
will need to check against on a lab node tomorrow with a backup of some prod. vm's running on the 4.x cluster atm.
> 3000 mSec Ping and packet drops with VirtIO under load
a bit scary it isn't resolved yet and nobody seems to have an idea whats going on there, especially as i planned upgrading my cluster dem 4.x to 5 during the next weeks.
will need to check against on a lab node tomorrow with a backup of some prod. vm's running on the 4.x cluster atm.
> 3000 mSec Ping and packet drops with VirtIO under load
i wonder what nics they have, if it's not some realtek driver that goes mad.
definitely will watch this thread, this is something i absolutely want to avoid lol
also on ovs now in the Labs for testing, with a routed leave/spine ecmp and vxlan.
but still needs some tuning, i only get 52Gb/s what imho should be more towards 65....
definitely will watch this thread, this is something i absolutely want to avoid lol
also on ovs now in the Labs for testing, with a routed leave/spine ecmp and vxlan.
but still needs some tuning, i only get 52Gb/s what imho should be more towards 65....