unmesh's latest activity
-
Uunmesh replied to the thread SOLVED: trying to run 2.5g multi-gig to an older juniper ex4300.@FingerBlaster The link won't come up in an EX2300 even with the Juniper branded version of this transceiver. Since neither the EX2300...
-
Uunmesh replied to the thread GBASE-T transceivers performance with NBASE-T - Marvell 88x3300 v/s Aquantia AQS-107.Since these are unmanaged, are there any visual indications for what link rate the ports have negotiated?
-
Uunmesh replied to the thread Mix 10G 2.5G, slow speed, high Retr.Glad it helped!
-
Uunmesh replied to the thread Mix 10G 2.5G, slow speed, high Retr.Best of luck!
-
Uunmesh replied to the thread Mix 10G 2.5G, slow speed, high Retr.You've really gone to town on VLANs! At least at the Gigabit Ethernet level, every room in the house that has either a Netgear or a...
-
Uunmesh replied to the thread Mix 10G 2.5G, slow speed, high Retr.2.5Gbps copper SFP+ transceivers are a hot mess so your experimental results will be instructive for the rest of us. I've had to return...
-
Uunmesh replied to the thread Mix 10G 2.5G, slow speed, high Retr.This reminds me that I need to test my AQ113 module
-
Uunmesh replied to the thread Converting HP Z238 C236 mainboard for homelab use.What's the size of this mainboard? I'm wondering if I can use it in an existing minitower chassis.
-
Uunmesh replied to the thread future planning for pFsense and 10Gb.I think I understand at least the network architecture and will need to find time to trial it. Thanks
-
Uunmesh replied to the thread future planning for pFsense and 10Gb.@Sealside Can you say more about your setup? I have a L3 capable core switch in my LAN but could never figure out how to have it play...