uldise's latest activity
-
Uuldise reacted to jpmomo's post in the thread NVMe RAID on Supermicro 2024US-TRT (829U2TS-R1K62P3-T + H12DSU-iN) with
Like.
The specific issue that I ran into (may not be an issue for you if you main concern is fault tolerance) was due to the # of pci lanes... -
U@nasbdh9 CPU-Z is a Windows Program right? I will not install windows. In order to stress the CPU I just used yes > /dev/null &. I think...
-
Uuldise replied to the thread Recommended self-hosted VPN software for smallest latency penalty.i started with userspace WireGuard-go until i got it working. after that i switched to kmod package.
-
Uuldise replied to the thread Recommended self-hosted VPN software for smallest latency penalty.so, thank you all for feedback. i finally have a time to experiment with OpnSense + Wireguard in Proxmox VM, and after all configuration...
-
Uuldise replied to the thread HPE FexFabric 5700 32x10GbE RJ45, 8x10G SFP+, 2x40G QSFP+.keep in mind that Norway is not in EU, so please remove the label. if you import goods from Norway to EU, then you pay additional...
-
Uuldise reacted to BoredSysadmin's post in the thread Recommended self-hosted VPN software for smallest latency penalty with Like.
You'd better off going directly with Wireguard than Zero-Tier as far as latency goes...
-
Uuldise replied to the thread PCIe Gen 4 bifurcation risers and NVMe SSDs.it really depends on motherboard used. how many PCIe slots it have, and which ones. so for example, look at this Supermicro system(but...
-
Uuldise replied to the thread Recommended self-hosted VPN software for smallest latency penalty.Thanks for response. in my case VPN endpoint and destination is on the same LAN. so in LAN there should be almost no latency at all. or...
-
Uuldise posted the thread Recommended self-hosted VPN software for smallest latency penalty in Networking.Hi, i'm not sure, where to ask, but i'm looking for suggestion of VPN software for smallest latency penalty. i know, every VPN solution...
-
Uuldise replied to the thread Struggling to get Proxmox booting via NVME on a SuperMicro server .. all help appreciated.don't waste your PCIe port. previous option should work just fine, just get proper cables :)
-
Uuldise replied to the thread [FS] High End NVMEs,HBAs ,Ram.PM
-
Uuldise replied to the thread PCIe Gen 4 bifurcation risers and NVMe SSDs.i have that card and it works very well on my AMD Epyc system. each x4 NVME disk needs four lanes. if you see cards, like HighPoint SSD...
-
UNew is nice if you get warranty or an invoice with VAT. Else new skews the price since sellers usually expect to get 80+% of the price...
-
Uuldise replied to the thread Gen4 U.2 NVMe Drives - How to connect to motherboard?.this is not 'passive' as it have PEX88048 PCIe Gen 4.0 switch chip...
-
Uuldise replied to the thread Gen4 U.2 NVMe Drives - How to connect to motherboard?.if you can live with gen3, i just finished similar setup with gen3 oculink card, see here...