thatch45's latest activity
-
Tthatch45 replied to the thread SAS Controller disappears after reboot.The heartbeat light noes not blink and the controller does not show up in the output of lspci, when it is working it does show up: ```...
-
Tthatch45 replied to the thread H12SSL and Epyc can't handle the ram.Actually, I did get hynix ram, and it has been just fine. It was certified by supermicro, I think the ram I had before was just too slow
-
Tthatch45 replied to the thread SAS Controller disappears after reboot.Is my face red! Latest Arch Linux running the current LTS kernel. Supermicro CSE-847E16-R1K28LPB Chassis with BPN-SAS2-846EL1 24-port...
-
Tthatch45 posted the thread SAS Controller disappears after reboot in RAID Controllers and Host Bus Adapters.I have 2 Supermicro H12SSL-CT motherboards, one of them has been doing something strange. When I reboot, the SAS adapter gets disabled...
-
Tthatch45 replied to the thread H12SSL and Epyc can't handle the ram.I should thank everyone, I ordered new ram from supermicro and it is working like a charm!
-
Tthatch45 replied to the thread H12SSL and Epyc can't handle the ram.I also did try it with and without any adapters - same issues. I also looked at the board and could not see any damage, and I ruled that...
-
Tthatch45 replied to the thread H12SSL and Epyc can't handle the ram.I installed the CPU, and ram from the one system in question on another board, and the exact same issues showed up, same DIMM slots were...
-
Tthatch45 replied to the thread H12SSL and Epyc can't handle the ram.You guys have been fantastic! I have reseated the CPU and carefully inspected it and the socket, I was unable to find any damage, dirt...
-
Tthatch45 replied to the thread H12SSL and Epyc can't handle the ram.nope, I installed some washers and now only 2 sticks show up. hopefully the board is not damaged and the ram is not bad. I have another...
-
Tthatch45 replied to the thread H12SSL and Epyc can't handle the ram.Thanks @nabsltd , I think that is it. the chassis I am using is used and I think part of it may be rising up and touching the...
-
Tthatch45 replied to the thread H12SSL and Epyc can't handle the ram.Thanks! I do not have a misplaced motherboard standoff, I checked before I posted I can reseat the CPU, I will give that a shot There...
-
TI just got a SuperMicro H12SSL motherboard and an AMD Epyc 7313 processor. The board boots up just fine and is running Linux like a...