shpitz461's latest activity
-
Sshpitz461 replied to the thread How to reformat HDD & SSD to 512B Sector Size.In case anyone wants to do the formatting in parallel, this is how you do it in linux (I'm running it currently on ProxMox, with a...
-
Sshpitz461 replied to the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching).@owenthewizard , which switch do you have? I saw the Arctic 6k on amazon, thought the 15k variant would be more suitable since the 6k is...
-
Sshpitz461 reacted to TonyArrr's post in the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching) with
Like.
You’d need to replace the fans with quieter models. Dunno how the ZP models react to that though, and I’d probably not do so if you’ll... -
Sshpitz461 replied to the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching).Bummer, my ICX 6610 runs @ ~6500 rpm, the 7150ZP runs @ ~9000 rpm in mode 1 :( I also tried to turn on fanless mode, but i get an error...
-
-
Sshpitz461 reacted to Thomas H's post in the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching) with Like.
I wanted to organize a list of items to buy for the ICX6450/6610. There's a lot of good information in this thread but they are...
-
Sshpitz461 replied to the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching).Is there a way to set the fans to slower speed?
-
Sshpitz461 replied to the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching).Success! Much appreciate the help @kpfleming !
-
Sshpitz461 reacted to kpfleming's post in the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching) with Like.
What version and flavor of the software did you install?
-
Sshpitz461 reacted to kpfleming's post in the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching) with Like.
You installed the layer 2 (switch) firmware, so you cannot create router interfaces which are layer 3 entities. The general...
-
Sshpitz461 reacted to kpfleming's post in the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching) with Like.
You have SPS firmware on the device, not SPR, so something didn't happen the way you expected it to. You also have subversion 'd' and...
-
Sshpitz461 replied to the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching).duh, i'm retarded! I missed the 'update_primary'!!! Doing it now, thanks!
-
Sshpitz461 replied to the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching).Oh, this is what I see: I'll try the flashing again, thanks! Do I have to reboot the switch in order to get into the bootloader? or...
-
Sshpitz461 replied to the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching).Haha, well, I'm just following orders... The guide said to set image to ICX7xxx/SPR08090mc.bin which is what I did. Do i need to...
-
-
Sshpitz461 replied to the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching).Also, fans are really loud with nothing connected to the switch, is there a way to lower the fan speeds?
-
Sshpitz461 replied to the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching).show version Copyright (c) Ruckus Networks, Inc. All rights reserved. UNIT 1: compiled on May 17 2021 at 06:38:01 labeled as...
