RolloZ170's latest activity
-
RRolloZ170 replied to the thread Hyve "S-SKUD 2" - 1U, 8x LFF SATA6, 2x LGA 3647 Skylake-SP, 2x PCIe x16, 2x OCP PCIe x8 w/2x 25Gbps Connectx-4 installed - $179 + Shipping.only one must be in CPU1(not CPU2) don't populate memory in CPU2 slots.
-
RRolloZ170 replied to the thread What CPU for LOW power ceph cluster.what PSU ? voltage 120V/230V ?
-
RI attribute low idle power to: CPU making it into C6 for package and cores, highly efficient PSU, no NVME but somewhat efficient SATA...
-
RRolloZ170 replied to the thread What CPU for LOW power ceph cluster.idling at or can idle at ? any PCIe GPU installed ? OS that never sleeps ?
-
RRolloZ170 replied to the thread What CPU for LOW power ceph cluster.
-
RRolloZ170 replied to the thread ES Xeon Discussion.the VRM of the supermicro X11DPL-i can be modded to run 165W and more(205W not recommended)...
-
RRolloZ170 replied to the thread ES Xeon Discussion.6148F is a omnipath-fabric CPU, not supported by X11DPL-i. the voltage for the OPA controller (2nd die) is missing. the processor may...
-
RRolloZ170 replied to the thread NVDimm support on AMD Epyc.you can put NVDIMM-N with backup batterie and or flash storage in every memory slot. this memory should not be erased on POST memtest...
-
RRolloZ170 replied to the thread EU FS: Xeon Silver 4210.4. Post one thread only if you have multiple items for sale, for trade, or that you want to buy...
-
RRolloZ170 replied to the thread NVDimm support on AMD Epyc.don't expect these 4 extra slots to be for NVDIMM. this is mostly only A2 / D2. memory population guide(manual): populate A2 / D2 only...
-
RRolloZ170 replied to the thread Can't get any LED to light on my Supermicro M11SDV-8C-LN4F.have you used the correct LAN port ? it is the left from behind view. this is 1GB (and 1GB only, not 100mbut, not 10mbit)
-
RRolloZ170 replied to the thread Can't get any LED to light on my Supermicro M11SDV-8C-LN4F.what do you expect more ? press the power button now ! all 3 8pin connected ?
-
RRolloZ170 replied to the thread NVDimm support on AMD Epyc.most likely yes, but the settings for Optane and NVDIMM are different. https://en.wikipedia.org/wiki/NVDIMM
-
RRolloZ170 replied to the thread Can't get any LED to light on my Supermicro M11SDV-8C-LN4F.i bet the good old PSU was not able to deliver enough +5VSB power. Note: old non server intel motherboards don't draw much standby...
-
RRolloZ170 reacted to k4J768's post in the thread Can't get any LED to light on my Supermicro M11SDV-8C-LN4F with
Like.
I went to the local IT store, bought a new PSU and installed it. It works like a charm now :) Thanks again for helping!