Recent content by pr1malr8ge

Humm I swore it was atlanta but yes.. Maybe its still related.. Who knows.

Just bringing up a possible querry on why these showed up from AT&T please read my thoughts over in the 10tb sas drive thread. https://forums.servethehome.com/index.php?threads/hgst-ultrastar-he10-10tb-129-95.34395/post-337519

I'm pretty sure I've read through all of the pages in this thread I have not read through the chassis thread mentioned in this and I have not seen any hints towards what I'm about to suggest... How ever I was just watching Youtube and watching Mythbusters cement truck explosion episodes and the...

According to replies on my post on Truenas forums the lack of the vendor specific attributes is common on sas drives.

Honestly doubt it would be the hba or the 12bay expander its on. As that would prevent the sata drives from reporting it also. Since the sata drives encapsulate over the sas link.

You know i'm going to be pissed if his 6tb outputs the vender specific information and helium levels. cause at that point I'm stumped on wtf to do. Less migrating to Truenas scale which is deb based. It hasn't been released long enough for me to want to make the switch.

Just for proof I'm not stupid lol :P

Readin that shows it sas.. if you're running *nix can you run smartctl -a on that drive and paste the output.

I understand that.. The 3tb drives were only referenced because they are on the same hba and running a -a will output venderspecific information. Rather then the 10tbs which are sas and they will NOT output helium levels or much of anything when compared to your sata version and my 3tb sata drives.

that doesn't work because it doesn't report back the vender specific info. which is what we've been going on with lol.. I referenced my 3tb hgst hus sata drives as they are on the same hba/expander and do show the venderspecific outputs. I made this over at the truenas forums...

No the bms is reporting on the 10tb drives. using sg_logs -a /dev/da2-7 [which are my 10tb drives] da8-13 is the 3tb sata drives and they do not report the bms and all of this was over the 10tb drives will not show helium levels. or the vender specific outputs. root@aeronas:~ # sg_logs -a...

No all my drives are HUH721010AL42C0's the 10tbs that is the 3tbs are hus and sata.. I think you probably skimmed on that.

I think I've managed to get my self into a bit of an run-a-round situation. So, the one long test that has been endlessly running as far as the report is concerned isn't actually running. It's a remnent log. Because I started the test but didn't let it finish it just stays in the log but it's...

Don't have seagate drives anywhere. as far as the long tests. I understand that can be ran with the drives online and in use.. as I said I started the first one when I did a quick test of the drives by them selfs in the chassis. I then shut the chassis down put in my 12 3tb drives back in the...

Another issue I've ran into is the smart background long.. Long story short when I first got the drives I downed my working truenas to run some tests first as I didn't have space to test any of the drives with the current machine running. I figured since they already went through the infant...