Recent content by Paul Toone

  1. P

    Mellanox-Connectx2 Setup

    I'll try that and report back thank you very much
  2. P

    Mellanox-Connectx2 Setup

    Each computer has 2 processors with 10 cores each. So, 20 cores per server. Is there a certain command I should use to make my copy-item command use more threads? Also, each computer has a 6gb/s sas controller. Will that slow it down? I did a copy-item on a 10 GB file and it took 40 seconds
  3. P

    Mellanox-Connectx2 Setup

    As a side-note, I just hooked these two cards directly (removing the switch) and got virtually the same statistics: C:\Program Files>NTttcp.exe -s -m 28,*,192.168.1.30 -l 512k -a 2 -t 5 Copyright Version 5.33 Network activity progressing... Thread Time(s) Throughput(KB/s) Avg B / Compl ======...
  4. P

    Mellanox-Connectx2 Setup

    I recently got two MNPA19-XTR Mellanox-ConnectX2 cards and installed them into my servers. I followed another thread on here and they are both running fw=2.10.0720, the vstat is here: hca_idx=0 uplink={BUS=PCI_E Gen2, SPEED=5.0 Gbps, WIDTH=x8, CAPS=5.0*x8}...