A seperate question:
For a management VRF, is it better practice to put an IP address on a loopback and forward that to the VRF, rather than a VE?
I ask because I have seen posts elsewhere, with people implying it's somehow better, but I fail to see how in any practical sense. Different if you...
Hi all,
Hoping you might be able to offer some guidance on moving from L2 to L3 code (I'm doing this really just as a learning exercise, actually do my routing in a VM).
I have a batch of VLANs, with a separate management VLAN (VLAN 10). That VLAN had the management IP on it for inband access...
No, I wasn't aware of that. If I ever get excited/bored enough, I'll revisit it. For now it has all just been rolled back and will stay as 1500 mtu other than the SAN switch, as that's all hardware that's happily playing along with jumbo's.
I haven't played with any QoS related stuff on the Brocade as yet, but generally you should be able to tag traffic on ingress in to a switch interface from the source. You then shape (or at least, police) the tagged traffic when it hits another interface.
If you are lucky, the Brocade would...
In my case, nearly all of that happens in virtual switching within the servers. Where it doesn't, they're on the IB switch with the SAN and can talk to each other over that. The only reason for jumbo on Eth was to speed up the access layer. Not worth the pain in this case, would rather have...
Just trim off the version number for more recent manuals:
http://docs.ruckuswireless.com/fastiron/
Didn't link to it though as my understanding was the last version suitable was 8.0.30(u, from memory). Can newer versions be run on the 6610 and 6650?
Yep, I'm coming around to that.
Decided I'll just run FDR IB on the SAN interfaces, go to 1500 mtu eth for the trunk to the Brocade, and run 1500 everywhere from there on out in the access layer. Proving to be a nightmare with the jumbo's on the ICX. Liking the ICX otherwise though, really nice...
Jumbo Frames. Don't run away...
Anyone else see SSH issues after globally enabling them?
I'm using the MGMT interface on the back to SSH to the ICX 6610. The interface MTU is 1500:
sh int man 1 | i MTU
Internet address is xxx.xxx.xxx.xxx/24, MTU 1500 bytes, encapsulation ethernet
If I do...
Disregard, I had ',' instead of '.' in the first nmcli command in the script that I failed to notice (bond.options).
Don't worry, I'll show myself out.....
Hmmm, seems like there is something suspicious in NetworkManager (at least on Clear Linux). Just built 'the same' bond using iproute2 commands, and the LAG on the ICX 6610 has come up.
Catting around in these two:
/proc/net/bonding/bond0/
/sys/class/net/bond0/bonding/
Suggests the configuration...
G'day Brocadeers
****
EDIT: To clarify, I've got LAG's running to windows hosts and a linux based NAS, but it's OS is fundamentally different to the more vanilla systemd, Clear Linux distro I'm trying below, so not of much help...
****
Has anyone managed to get a LACP (802.3ad) LAG running...
Thanks all, it's working correctly and as expected after a reboot, seems to have just got a bit hung up after the vlans were moved around on the port.
As to your question EngineerNate, it's so that in the event of a hardware failure of the primary firewall, a cable can be moved to alternative...
Well, exactly as I originally wrote basically:
I want e 1/1/1 to drop any traffic from the end point that is tagged as VLAN 25 or 200, whilst accepting VLANs 1000 and 322.
(The above could be clarified to include: "and also drop any untagged traffic, or traffic tagged with any vlan except 1000...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.