With Hynix better to get CJR, which are kind of the "poor mans Samsung B-dies". I'm be able to overclock it (HMA84GR7CJR4N-VK) to 3200Mhz on EPYC platform.
You could check the spec here
I pickup the WUH721414ALE6L1
The second to the last letter means:
Power Disable Pin 3 status
(0 = Power Disable Pin 3 support
L = Legacy Pin 3 config – No Power
Disable Support)
Last digit means:
Data Security Mode
0 = Instant Secure Erase
1 = SED*: Self...
I upgraded to single socket 8259CL (210w Tdp) and I have to set the minimum fan to 40% in BIOS to make sure it's cool in the summer. For some reason I couldn't see the sensor temp status under ESXI 8.0.
They only have factory re-certified 14TB SATA drives. I ordered 2 last week it was on sale @$117 USD, now it's back to $127.
The ones I got having recertifed labeled on Mar 2023 with 0 power on.
Got it thanks, the tester is super handy. I learned a hard way not all ATX cables are equal even with the same brand(EVGA). (I burned 3 hard drives with wrong ATX -> SATA powercable before, the pin on PSU side are different between two models.)
Very cool! I always curious how can I add more PSU to the same system as these 4090s are directly connecting to the PCI slot (not risers), power supply needs to coming from one single source. This 4 to 1 combined board is the key.
For PCIE to EPS I bought 4 of these Power Cable 030-0571-000...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.