gregsachs's latest activity
-
Ggregsachs replied to the thread USB C/Thunderbolt hub.The lenovo usb-c docks are available very cheaply on E-Bay, and should work well for your needs. There is a wiki that compares them...
-
Ggregsachs replied to the thread Server/CPU recommendations for ESXi host for Blue Iris, Linux media/file/web server.If you don't need a lot of direct attached storage, something like a lenovo/dell/hp tiny with vPro for remote control could work...
-
Ggregsachs replied to the thread SAS Expander does not detect more than 8 drives.Dumb idea-have you tried all of the BP ports individually? (IE are you sure you don't have any dead ports on the expander?) Will they...
-
Ggregsachs replied to the thread SAS/HBA SFF-8088 Maximum bandwidth and recommendations.I have not played with the HPE unit. I have a Netapp ds2246 in my basement that definitely works with SATA drives, with a caveat, they...
-
Ggregsachs replied to the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching).Question about the 7250-48p, on 9.0.10; the cli seems slow and laggy at times. Is that normal?
-
Ggregsachs replied to the thread EXPIRED Brocade ICX7250-48P ($105/ea OBO + Reasonable Shipping).I plugged a camera into each to see if it powered up.
-
Ggregsachs replied to the thread EXPIRED Brocade ICX7250-48P ($105/ea OBO + Reasonable Shipping).If you do the config upload at the 8.0.80mc step, when it gets updated the update will translate dual mode. I haven't played...
-
Ggregsachs replied to the thread EXPIRED Brocade ICX7250-48P ($105/ea OBO + Reasonable Shipping).I did a tftp download to a text file, from enable prompt: Copy running-config tftp “IP Address” “Filename.cfg” That got me the current...
-
Ggregsachs replied to the thread EXPIRED Brocade ICX7250-48P ($105/ea OBO + Reasonable Shipping).Got mine today,good shape mechanically, one ear dinged up and had to be reformed. One port seems to be dead POE, but the other 47 are...
-
Ggregsachs replied to the thread EXPIRED Brocade ICX7250-48P ($105/ea OBO + Reasonable Shipping).I did get a $95 auto-accepted at ~11PM eastern time yesterday.
-
Ggregsachs replied to the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching).Cool, thanks! So basically set different VE IP for the switch management, copy config file, get firmware to 8.0.90, get firmware to...
-
Ggregsachs reacted to adman_c's post in the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching) with
Like.
I'm pretty sure I did just that--I definitely did not start over from scratch. The only thing that I remember being different is the... -
Ggregsachs replied to the thread EXPIRED Brocade ICX7250-48P ($105/ea OBO + Reasonable Shipping).in for 1; I posted in the mega-thread as well, but... If I have a 6450-48p, can I copy the config file to this and go?
-
Ggregsachs replied to the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching).Apologies if this has been asked; I searched but couldn't find a clear answer. I just ordered a 7250-48p to replace my 6450-48p. Can...
-
Ggregsachs replied to the thread SAS/HBA SFF-8088 Maximum bandwidth and recommendations.Any ability to use breakout cable direct to the HBA and test that way? Would isolate issue to the cable..