Gerhen's latest activity
-
GGerhen reacted to Terry Wallace's post in the thread So passed 1K in cpu cores today. My proxmox cluster may not qualify as small anymore.. :) with
Like.
-
GHere are my numbers for network devices I have stacked on my bench and not in storage. All figures had only one PSU, if dual, connected...
-
GGerhen replied to the thread Firewall + Upgrade Home Network to 10G.Was in this position last fall. I looked options from Protectli and competitors and none had a 10G option at the time. Pricing for a...
-
GGerhen replied to the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching).Several posts knocking 9.x so thought I’d chime in with a counter example. For me, been running 9.x since late 2023 including 1 or 2...
-
GJuniper EX4550 - 32 10Gbase-T, only console port connected 1 PSU No stacking module No expansion module 135W @120V 1 PSU No...
-
GGerhen replied to the thread Ruckus Wireless as an Unifi alternative?.Decided to try the latest 200.15 and everything is working. For reference, we mainly have Apple devices and have 3 R710 APs set up...
-
GRUCKUS Unleashed 200.15.6.112.52 minor version release for those Apple users still on 200.14 due to the regression in the initial...
-
GGerhen replied to the thread Big Multigig (2.5 / 5 / 10) PoE++ with QSFP+ / QSFP28 switches.Better than eBay by quite a bit. This was late last year.
-
GGerhen replied to the thread Big Multigig (2.5 / 5 / 10) PoE++ with QSFP+ / QSFP28 switches.You could always try Juniper CPO this way you could opt to purchase a support contract for firmware updates. I contacted them late last...
-
GGerhen replied to the thread Big Multigig (2.5 / 5 / 10) PoE++ with QSFP+ / QSFP28 switches.There's one on eBay at the moment: Juniper EX4300-48MP Ethernet Switch | eBay I had earmarked the Aruba R8S89A as a possibility but...
-
GGerhen replied to the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching).Got the same switch, same firmware and not seeing that on any of my APs. Have you tried using other ports on the switch?
-
GGerhen reacted to RecursiveG's post in the thread Help with IPv6 routing issues on dual-stack LAN with Like.
When you specify eth1 as the "nexthop" for the /48 block, Linux assumes the /48 block is directly accessable over that port at layer 2...
-
GGerhen replied to the thread Help with IPv6 routing issues on dual-stack LAN.Hi @RecursiveG, thank you! I tried your suggestion, and the results surprised me, trying to wrap my head around why. With static route...
-
GGerhen replied to the thread Help with IPv6 routing issues on dual-stack LAN.Hi all figured out my issue and posting here in case it's useful to others. I needed to configure two additional things: 1) On the...
-
GHi all, Trying to set up a IPv6 on the LAN to mirror the subnet deployment used with IPv4 (e.g. main network, IoT, guest, etc...)...
-
