FingerBlaster's latest activity
-
FFingerBlaster replied to the thread Minisforum MS-01 PCIe Card and RAM Compatibility Thread.I am using the pm938a in 3 nodes running ceph, partly because I made a mistake and ordered the wrong thing, but it's working fine
-
FFingerBlaster replied to the thread Getting vPro remote KVM working on Minisforum MS-01.Mesh Commander works fine for me except i also find that networking mounting an iso through AMT is janky AF and doesn't work right half...
-
FFingerBlaster replied to the thread Minisforum MS-01 PCIe Card and RAM Compatibility Thread.an oculink egpu would be a much better long term solution than trying to cram some sff gpu with a low power budget in there, that's...
-
FFingerBlaster replied to the thread Minisforum MS-01 PCIe Card and RAM Compatibility Thread.So what's the verdict on the best GPU to fit in here? My use case will be for an LLM on one of my proxmox nodes
-
FFingerBlaster replied to the thread Minisforum MS-01 PCIe Card and RAM Compatibility Thread.The paste on my units seemed fine, but I finally had a chance to install PTM7950. Not noticing a big change in temps during a stress...
-
FFingerBlaster replied to the thread Minisforum MS-01 PCIe Card and RAM Compatibility Thread.i wonder if that's the smbus issue that requires you to tape off some pins on the pcie connector.
-
FFingerBlaster replied to the thread Minisforum MS-01 PCIe Card and RAM Compatibility Thread.That's fantastic! as i do want to put an HBA in 2 of my units
-
FFingerBlaster reacted to caplam's post in the thread Minisforum MS-01 PCIe Card and RAM Compatibility Thread with
Like.
You can put a hba with proper ventilation -
FFingerBlaster replied to the thread Minisforum ms-01 i9-13900H 96GB with Proxmox.I'm now running 3 13900h nodes, with 96gb of RAM, 1xu.2 and 2x 22110 m. 2 drives. Running proxmox and ceph over a thunderbolt direct...
-
FFingerBlaster replied to the thread Minisforum MS-01 PCIe Card and RAM Compatibility Thread.I'm currently using that adapter as a dedicated OOBM port. I'm a little confused by what your experiencing but I'm curious so that I...
-
FFingerBlaster replied to the thread Minisforum MS-01 PCIe Card and RAM Compatibility Thread.Fwiw I'm using a u. 2 pm983a and have no problems
-
FFingerBlaster replied to the thread Minisforum MS-01 PCIe Card and RAM Compatibility Thread.The 22110 is a larger enterprise card I'm not sure how the extension board would help him
-
FFingerBlaster replied to the thread Minisforum MS-01 PCIe Card and RAM Compatibility Thread.Did you have to snap it off to make it fit? Wondering if an full size 110mm m.2 drive would fit
-
FFingerBlaster replied to the thread Minisforum MS-01 PCIe Card and RAM Compatibility Thread.I just ordered Honeywell PTM7950 to try on this, never used it before.
-
FFingerBlaster replied to the thread Minisforum MS-01 PCIe Card and RAM Compatibility Thread.benefits of lower temps? I'd be so interested in one of these for a boot volume, but i just don't think there's room in the chassis...