Recent content by EluRex

dev@ceph.io[/email]/thread/FYASBMA2NOAVXEWM3TVFGMGUJXGHD4MB/"]Re: Ceph RDMA Update - Dev - lists.ceph.io has no update info since 2019 nov... seastore uses spdk this will definate boost nvme ssd performance two fold or more however, to lower latency, you definitely needs dpdk, and RDMA will...

ceph will not support RDMA in production yet and seems development on it is extremely slow and mellanox commitment on it ceased and now it is part of async messenger development on supproting dpdk + spdk is probaby faster than waiting for rdma

dell server will lock EPYC cpu.... https://www.servethehome.com/amd-psb-vendor-locks-epyc-cpus-for-enhanced-security-at-a-cost/

good deal

if your motherboard has onboard 10 base-T like x550/552/557, they are extremely hot as well, also the MOSFET are hot as well

This is all silverstone case issue, its the back plane for hdd/sdd blocks all air flow.... I have to open and clean my cs280 on regular basis (like every 3 month) It seems to me that cs381 backplane has improved this is 810a SAS3 backplane

the mobo is X11SSH-CTF | Motherboards | Products | Super Micro Computer, Inc. with SAS3 controller now it has a sas3 variant model (sff8643) already Ihave sliverstone cs281 (2.5" version) which cooling sucks... I dont recommend siliverstone cs381

@BigServerSmallStudio my new build 2020 using sas3 mobo with sas3 backplane the board has lsi3008 and also intel x550 onboard, must use additional blower fan to cool it down.

if 6900xt support sriov it would be a blast

Optimans, I solved the status page issue by ln -s /bin/lsblk /usr/bin/lsblk please note my current Proxmox 6.0 (buster) is upgraded from Proxmox 5.X (stretch), thus I have those path issue. Complete PVE 6.0 installation for cockpit and zfs manager as follow echo "deb...

I have provided all info in above post and here is the screenshot of the console And I found out that zfs.js calls /usr/bin/cat /usr/bin/grep /usr/bin/echo but Proxmox bin directory is at /bin/cat /bin/grep /bin/echo so I made ln -s to make then works I have not test all the...

I have install Cockpit 202 (via buster-backport stable) and Cockpit ZFS manager on Proxmox VE 6.0 (which is Debian Buster), However I am getting following error I have zfs module install and loaded into kernel, please check root@pve-nextcloud:~# modinfo zfs filename...

What a shame...

I am using usb disk on USB 2.0 ports....alot of times usb disk die not because the write wear but its USB host voltage over usb disk limit

CS380B is extremely hot due to its back pane blocks all air flow