Recent content by efschu3

No. 10series does not have tensore cores. Volta was the first. So quiet useable today, from a performance view. Pascal (10series) not so.

With mint shouldn't they be pre installed and work ootb?

SD install on mint should not take longer then 10 minutes? Sry

Which RDMA capable software are you using? I do: NVMeOF ISER NFS samba lgproxy (network proxy for looking-glass.io)

Actual TNS is a debian, so everything you can do with a debian you can do with TNS. But not the clicky'webfrontend-way. Need to do it by cli.

If it's not listed in the specs, then they'll only do 1gb and 100gb. There exists backwards compatible transceivers, but if not listed in the specs, they'll not do 40gb.

tnx, it was mstconfig -d 01:00.0 set EXP_ROM_UEFI_x86_ENABLE=1

upgraded my m720q with a ConnectX-5 100GB Pentium(R) Gold G5400T / 8 GB single module boot initrd.img via legacy pxe iscsi mount nvmet via rdma in dracut working fine so far, here some results, fyi: But I would like to do it...

Hi, which options do I have for (cheap/used) 56Gb transceivers for my SX6036 setup. (running with DACs ATM, but next clients wont sit in the rack) Thnx in advance

But it can do int8 and int4? Probably more interesting then fp16 for local llms. (I have a 2080ti and a P40 and I'm running llama2 on it)

One left, but good for me they don't ship to EU. Cus actual I don't "need" it Saved me 50 bugs xD

You must unlock the AMD CBS menu in your UEFI file and flash it back. Probably you need a spi programmer for that. And that's only the menu - if it will boot, or not, with oc settings... no one can tell you.

Well ARI setting was on AUTO, set it to ENABLE in UEFI and it works...

I'm running proxmox 6.5.11-7-pve and trying to set up sriov on second port. But it fails. With unloaded mlx5_core #lspci|grep -i Mel 0b:00.0 Ethernet controller: Mellanox Technologies MT27700 Family [ConnectX-4] 0b:00.1 Ethernet controller: Mellanox Technologies MT27700 Family [ConnectX-4]...

Well that doesn't help me either. :D;)