Recent content by DouglasteR

Faster than all my interfaces combined :eek:o_O

I'm back guys, sorry for the delay. Tested multiple Gbic and none worked. Then i tested with a twinax and it instantly connected at 10gbps. So it CAN'T do anything bellow 10GB/40GB. 1, 2,5 and 5 don't work ! Thanks for the help and patience ! SOLVED !

Doing a loopback with the QSFP+ cable ! It seems to detect the link ! And in Windows, the adapter now seems operational !?: Interfaces are configured as 10.0.0.1 and .2 . Strange, maybe it really didn't like my QSFP->SFP+ adapters :oops:

IRRC i overrided the PSID (with the flag). But i´ve saved the original in the .ini. The other end device is a SFP+ mikrotik switch. Hmm, they are from the same seller, but different batches. I will try to connect it directly to another mellanox tonight and report back. Thanks guys.

Already tried ! It indeed confirms it is in eth mode, but it stays braindead. When the card arrived, i put it directly in Pfsense and when i tried to switch from ib to eth the adapter rejected the change.

As the title summarize, i have an Oracle CX354A dual port that for some reason is hard locked in IB. Even if i flash it (and i've tried dozens of firmwares) with eth image the adapter simply don't work, the interface stay online but braindead: I've tried 4 sets of QSFP->SFP+->10gb and 5gb...

I believe it's a PM863, here's the label on it: I've tried to secure erase it but it fails. Thanks

Another brick wall :(

Much appreciated, will try asap and report back ! Thanks !

Great ! Which tool is best recommended for this ? Thanks for the effort guys !

:( thanks for answering

Great ! @napalm_atx , please, if you have it, can you share this firmware ? It´s for a IBM 4k sector locked SAS SSD ! We believe it is firmware locked and dont really have much of use in it´s actual state. Thanks guys !

Unfortunately it also didn't work. It simply fails to format :( Is there any hope :( ?

Err, looks like i need help. I can see them just fine, but can't format or sanitize either (disconsider the Micron, the drives in questions are the IBM ones). Error in sg_format: Error in sg_sanitize: Error while trying to initialize the drive in Windows: The drive as seen by LSi...

Thanks, will try this weekend on my LSI HBA and report back.