Recent content by cuco

  1. C

    Memory Configuration for Epyc 7282

    Hello, i plan to replace my 7551p cpu with a more energy efficent and a more single core focused cpu. So i plan to use a 7282 Epyc2 Cpu. But i am a bit confused with the memory set. This is a 4 Channel CPU when i know correct. Why does AMD claim that is is 8 Chennel on theri Home Page? Never...
  2. C

    Mellanox ConnectX-3 lost Connection after Hyper-V Installation on other NIC

    So i resolved the issue. The Card works well. no Problems any more. I checked the device manager this morning and recognized that there are a few devices that were no more installed. Probably because i made a bios update before i installed the hyper-v machine. after reinstalling the drivers of...
  3. C

    EU [FS] Intel DC-4600/LSI 9400-16i/LSI 9400-8i

    hey, i am looking for a ~1TB U.2 Drive. Are your ssd u.2?
  4. C

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    Hello, i am looking for a compatible RJ45 Tranceiver with 1G/2,5G/5G and 10G support. Has anyone tested this yet and can recomend a module? Otherwise i would order the ordinary Fiberstore . com module with brocade compatibility. thanks
  5. C

    Mellanox ConnectX-3 lost Connection after Hyper-V Installation on other NIC

    the i350 with two cables and the mellanox are hocked to a brocade icx6610. I had this running with one cable on the i350 for WOL usage and the mellanox for fast connection. This worked and had no issues. Should i use a sort of link aggregation here? I thought this is not necessary cause i dont...
  6. C

    Mellanox ConnectX-3 lost Connection after Hyper-V Installation on other NIC

    No i dont need it. It was disabled in BIOS and i enabled it to test if it works then. But didnt solve the issue. It was enabled in the Virtual Switch i created. So i erased it and created a new one. but this didnt help. This is so strange. Getting an ip but no connection to internet etc. The...
  7. C

    Mellanox ConnectX-3 lost Connection after Hyper-V Installation on other NIC

    Hello, my MellanoX ConnectX-3 worked well the last Months. But last month i installed a HyperV Machine with an external Switch connected to one of my four Intel i350 Nics. Since then my Mellanox 40G connection doesnt work any more. The Server reports a IP Adresse. But i cant ping it, It also...
  8. C

    Keep IPMI BMC Functions while Use NVDIA GPU for specific Functions

    As soon as i set the nvdia card as primary the IPMI video card will no longer work for KVM. I just get a Black screen. My Resolution was to buy a used KVM console for my rack and a 4k HDMI Dongle so that steam can stream up to 4k.
  9. C

    Keep IPMI BMC Functions while Use NVDIA GPU for specific Functions

    Hallo, I use a supermicro h11ssl-nc with a epyc 7551p. I also own a 2070rtx. I dort have keyboard, Mousse and Monitor connected. Everything runs over the aspeed bmc Chipset. Normally i dont use a graphic card. Biut my plan is to set up a steam stream Client with this Server. I have two options...
  10. C

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    Hello all together, I am using a brocade icx6610 24p directly behind my modem. A Fritzbox 6591. Every device is connected to the brocade. My problem is that in my setup I get asynchronous audio streams over time in my different zones. I never had this issue before. It started when i starter...
  11. C

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    i think he ment that. So i will search a 19gb wifi6 AP. Seems that there only is one from huawei...
  12. C

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    Hello guys, i own a 6610-24 and i want to buy a new access point. I tend to go for AX or wifi6. But these devies have 2,5gbit oder 5gbit network. Is it possible to use a RJ45 Tranceiver to a SFP+ Port of the brocade and get the full speed to the AP? For example: Cisco SFP-10G-T-S 10G SFP+ Modul...
  13. C

    EU FS AMD Epyc 7551p | Gigabyte MZ31-AR0 | 128GB 8* 16GB DDR4 2666

    Hello, i want to sell my Server System. Want to get smaller with an Ryzen Asrockrack or intel scalable with less power consumption. Pictures on demand. Here is whats for sale: Total Serverwith cables: 2200€ AMD EPYC 3551P • Kerne: 32 • Threads: 64 • Basistakt: 2.00GHz • Turbotakt: 3.00GHz 8 *...
  14. C

    EU [WTB] already bougth -- amd Epyc 7551

    This is just the 7001 version. sorry.
  15. C

    Lenovo 930-8i to Broadcom SAS 9460-8i SAS3508

    hey, i am lokking for an Lenovo 430-16i to use with an Asrockrack X470D4U. Do these cards work in non Lenovo Setups? How about drivers? can the broadcom ones be used? And has anyone flashed a HBA like this? Or only raid cards? Thanks for the help!