Recent content by Carpenter

I've proceeded the third conversion attempt of my EMC SX6012 switch, this time based on the "short version" (provided by @Stephan) of the new conversion guide v1.12. Everything works great now! :cool: The only hurdle I had to overcome was activating the two Ethernet interfaces after booting the...

Yes, I know, that's why I've added these lines of the log file, but perhaps I should add the lines occurring before too. The following lines has been logged before the [portd.WARNING]: Question Is this a known error indicating a missing or wrong step of the conversion process? If not, I will...

I've converted an EMC SX6012 switch for the first time, based on the conversion guide v1.2, considering the instructions for 3.6.8012. I can login (via cli and gui) successfully, but the switch reboots every 5 minutes. The switch logs the following: In the CLI and GUI I can't see any fans...