boerni666's latest activity
-
Bboerni666 reacted to Pietro395's post in the thread Fujitsu Futro S920 Thin Client as opnsense firewall with
Like.
I don't use Futro as a router, I can't do the test sorry. If anyone needs it I have summarized all the steps of the Editcmox procedure... -
Bboerni666 replied to the thread Fujitsu Futro S920 Thin Client as opnsense firewall.try a different, multithreading capable, compress util? like pbzip2 or pgzip?
-
Bboerni666 replied to the thread Fujitsu Futro S920 Thin Client as opnsense firewall.Ok, would be interesting to know if the Futro could handle the 2gbps via being the PPPoE Entpoint itself, since PPPoE is not very...
-
Bboerni666 replied to the thread Fujitsu Futro S920 Thin Client as opnsense firewall.Nice! and how is CPU utilization? Does the connection use PPPoE btw.?
-
Bboerni666 reacted to Pietro395's post in the thread Fujitsu Futro S920 Thin Client as opnsense firewall with Like.
I succeeded! now I reach these speeds Speedtest by Ookla Server: Vodafone IT - Milan (id: 4302) ISP: Telecom...
-
Bboerni666 replied to the thread Fujitsu Futro S920 Thin Client as opnsense firewall.yeah, you're running PCIe Gen 1. You should really try to enable PCIe Gen2 using the FreeDOS/editcmos workflow
-
Bboerni666 replied to the thread Fujitsu Futro S920 Thin Client as opnsense firewall.Can you show me the output of "lspci -vvv" ?
-
Bboerni666 replied to the thread Fujitsu Futro S920 Thin Client as opnsense firewall.I could get around 2Gbit/s NAT-Performance, but using an upstream Fiber Conection can be sth different. Are you also using PPPoE to...
-
Bboerni666 replied to the thread Fujitsu Futro S920 Thin Client as opnsense firewall.according to the last iperf3 test, it looks like your card is limited to PCIe Gen 1. Theres some how tos in this thread how to setup...
-
BHi, following is a rough sketch of my home network: When using my Laptop in the Wifi, i can't reach the IPMI of my KVM Host! It is...
-
-
Bboerni666 replied to the thread Hasivo S600WP-5GT-2S+.Anyone can give out experiences on VLANs? Heard those cheap chinese switches like to just act like dumb switches until the Firmware...
-
Bboerni666 replied to the thread Fujitsu Futro S920 Thin Client as opnsense firewall.well, try out if its enough and see if the driver overhead isnt too big. you can always update the bios and change the bios setting...
-
Bboerni666 replied to the thread Fujitsu Futro S920 Thin Client as opnsense firewall.Theres no NVME. The Board has a PCIe x4, Mini PCIe and one mSATA slot. No M.2! Just buy an mSATA SSD, you won't notice the difference...
-
Bboerni666 replied to the thread Fujitsu Futro S920 Thin Client as opnsense firewall.i can saturate 2.5GB links, i think people with 10GB Hardware in their futros claimed sth about 3.2GB from port to port.
-
Bboerni666 replied to the thread Fujitsu Futro S920 Thin Client as opnsense firewall.This command enables PCIe2.0 on the FutroS920. Boot into FreeDOS and use the attached editcmos.exe tool. You can verify by looking at...
