986box's latest activity
-
9986box replied to the thread 2U Short JBOD Disk shelf - SAS3.Shorter works better as network equipment sit on the other side of the rack. Is compatible AOC-SAS3-9300-8E HBA required or any LSI...
-
9986box replied to the thread 2U Short JBOD Disk shelf - SAS3.Great info! Give me a few days to digest this. Possible to have a mix of both 2.5 and 3.5” drives? Still trying to digest info from...
-
9Looking for approx 12 drives disk shelf supporting SAS3 backplane. Don't need to install m/b. Just for power supply and drives. Current...
-
9986box replied to the thread Uncharted waters with CWWK AMD 7840HS ITX board... under "KingnovyPC" brand.Per Reddit, ECC does not work
-
9986box replied to the thread Crossflash Dell H330 to HBA330.Latest Dell HBA330 16.17.01.00, A08 version. I have to check if I can enable power management thru Trunas after I rack the server. Inner...
-
9986box replied to the thread Crossflash Dell H330 to HBA330.Finally find some time to look into the HBA. using sas3flash program to access card works. either displaying info or SAS address. Looks...
-
9986box replied to the thread Crossflash Dell H330 to HBA330.Said controller is installed in Dell server. taping pin 5 & 6 is not needed. Current firmware is on version 16.17.01.00. Usually going...
-
9986box replied to the thread Crossflash Dell H330 to HBA330.Try to flash the smc3108.rom file results in error. megacli.exe -adpfwflash -f smc3108.rom noverchk -a0 ERROR:Could not detect...
-
9986box replied to the thread Crossflash Dell H330 to HBA330.I did find the same package zipped file from a reddit post. I did not use the fw in the zipped file. Instead I used the fw from Dell...
-
9Found the web archive for the cross flashing instructions. Link to the zipped file is not working. Looking for SMC3108.rom file as...
-
9986box replied to the thread What is a HUH72808CLAR8000?.sorry for bring this back to life. I have 4 HUH72808CLAR8000 drives. Anyone updated firmware on these drives?
-
9986box replied to the thread Inspur-branded LSI9300-8i for $50.I bought one from the seller last month. Works out of the box in r240 running Trunas.
-
9986box replied to the thread Sliding rail kit for Dell R240.Inner P/N W874K is the same for static rails kit. Any idea what other models uses P/N W875K too?
-
9Dell static rails kit A4 is listed for R240. Are they compatible sliding rails kit ? Anyone use one before?
-
9986box replied to the thread Dell Poweredge R240 - Barebones w/ Xeon E-2124 - $180.Where did you install the drive? 4 of the drive bays are populated. found a video showing how to install. also ordered both the Dell...