Hi everyone,
For the (un)lucky of you to get a ConnectX-1 card, I've found this firmware buried deep into the MLNX site :
fw-ConnectX2-rel-2_9_1314-74Y2987.bin.zip
Also - iso's for mlnx ofed - firmware included here http://www.mellanox.com/page/firmware_table_IBM_archive
the firmware is contained here : MLNX_OFED_LINUX-2.0-2.0.0.3-rhel6.3-x86_64.iso
or here : MLNX_OFED_LINUX-2.0-2.0.0.1-rhel6.3-x86_64.iso
I've just flashed my HP 517721-B21 card and it's ok for now. I haven't got the chance to test things yet and I wouldn't want to brick it again (ConnectX-2 fw ftw ...) as I'll have to wait till tomorrow to fix it.
flint -d /dev/mst/mt26428_pci_cr0 q full
Image type: FS2
FW Version: 2.9.1314
FW Release Date: 22.3.2013
MIC Version: 1.5.0
Rom Info: type=PXE version=3.4.145 devid=26428 proto=VPI
Device ID: 26428
...
PSID: HP_0120000009
For the (un)lucky of you to get a ConnectX-1 card, I've found this firmware buried deep into the MLNX site :
fw-ConnectX2-rel-2_9_1314-74Y2987.bin.zip
Also - iso's for mlnx ofed - firmware included here http://www.mellanox.com/page/firmware_table_IBM_archive
the firmware is contained here : MLNX_OFED_LINUX-2.0-2.0.0.3-rhel6.3-x86_64.iso
or here : MLNX_OFED_LINUX-2.0-2.0.0.1-rhel6.3-x86_64.iso
I've just flashed my HP 517721-B21 card and it's ok for now. I haven't got the chance to test things yet and I wouldn't want to brick it again (ConnectX-2 fw ftw ...) as I'll have to wait till tomorrow to fix it.
flint -d /dev/mst/mt26428_pci_cr0 q full
Image type: FS2
FW Version: 2.9.1314
FW Release Date: 22.3.2013
MIC Version: 1.5.0
Rom Info: type=PXE version=3.4.145 devid=26428 proto=VPI
Device ID: 26428
...
PSID: HP_0120000009
Last edited: