I have the following:
H11SSL-I
Firmware Revision: 01.52.15
Firmware Build Time: 11/08/2021
BIOS Version: 2.4
BIOS Build Time: 12/27/2021
Redfish Version: 1.8.0
CPLD Version: 02.B4.02
BIOS settings attached
All three power connector are attached - JPW1 (4pin), JPWR1 (8pin), and JPWR2 (24 pin)
EPYC 7302P
2 HBAs Slots 3 & 5 - 3.0x8
1 10g card - Slot 1 - 3.0x8
2 SATA SSDs
ProxMox - pve-manager/7.3-3/c3928077
Everything works great.
When I add the Tesla P4 in Slot 6 - 3.0x16, various things stop working.
One one boot, the onboard sata ports don't work.
On the next boot, the 10g card doesn't work.
On the next boot the system hangs, have to power off with the power button.
I remove the P4 and everything works again.
Do I have a bad P4?
Is there a setting I need to change in the BIOS?
Any assistance would be appreciated. Thank you.
H11SSL-I
Firmware Revision: 01.52.15
Firmware Build Time: 11/08/2021
BIOS Version: 2.4
BIOS Build Time: 12/27/2021
Redfish Version: 1.8.0
CPLD Version: 02.B4.02
BIOS settings attached
All three power connector are attached - JPW1 (4pin), JPWR1 (8pin), and JPWR2 (24 pin)
EPYC 7302P
2 HBAs Slots 3 & 5 - 3.0x8
1 10g card - Slot 1 - 3.0x8
2 SATA SSDs
ProxMox - pve-manager/7.3-3/c3928077
Everything works great.
When I add the Tesla P4 in Slot 6 - 3.0x16, various things stop working.
One one boot, the onboard sata ports don't work.
On the next boot, the 10g card doesn't work.
On the next boot the system hangs, have to power off with the power button.
I remove the P4 and everything works again.
Do I have a bad P4?
Is there a setting I need to change in the BIOS?
Any assistance would be appreciated. Thank you.
Attachments
-
92.2 KB Views: 16
-
68.4 KB Views: 16
-
130.9 KB Views: 17
-
264.5 KB Views: 16
-
255.1 KB Views: 16