Folks
I have been trying to figure out how to properly set my fan speed on my CPU for somet ime now and have spent countless hours reading about it, trying to get this to work. I thought I had it then something changed this morning.
I have the following mobo:
SUPERMICRO MBD-X10SRL-F Server Motherboard LGA 2011 R3 -
I have a Noctua cooler on it with two PWM fans.
I walked into my office this morning and could hear some fans 'pulsing'. From what I have learned in the past, I know it is the CPU fan and I cant seem to get it right the way i want (the pulsing sound is driving me crazy).
Here is the output from ipmi tool:
FAN1 | 1700.000 | RPM | ok | 300.000 | 500.000 | 700.000 | 25300.000 | 25400.000 | 25500.000
FAN2 | 1700.000 | RPM | ok | 300.000 | 500.000 | 700.000 | 25300.000 | 25400.000 | 25500.000
At one point, I had them steady at 500rpm, which was great. They were silent. I would like them to be set at 500pm, but go no higher than 900rpm and for it to stop pulsing....
I am really hoping for some help to figure this out. I am really at my wit's end right now with this
I appreciate the help.
TCG
I have been trying to figure out how to properly set my fan speed on my CPU for somet ime now and have spent countless hours reading about it, trying to get this to work. I thought I had it then something changed this morning.
I have the following mobo:
SUPERMICRO MBD-X10SRL-F Server Motherboard LGA 2011 R3 -
I have a Noctua cooler on it with two PWM fans.
I walked into my office this morning and could hear some fans 'pulsing'. From what I have learned in the past, I know it is the CPU fan and I cant seem to get it right the way i want (the pulsing sound is driving me crazy).
Here is the output from ipmi tool:
FAN1 | 1700.000 | RPM | ok | 300.000 | 500.000 | 700.000 | 25300.000 | 25400.000 | 25500.000
FAN2 | 1700.000 | RPM | ok | 300.000 | 500.000 | 700.000 | 25300.000 | 25400.000 | 25500.000
At one point, I had them steady at 500rpm, which was great. They were silent. I would like them to be set at 500pm, but go no higher than 900rpm and for it to stop pulsing....
I am really hoping for some help to figure this out. I am really at my wit's end right now with this
I appreciate the help.
TCG