It looks like my device is in a much worse situation, here is the information after reboot:
U-Boot 2009.01 SX_PPC_M460EX SX_3.2.0330-82-EMC ppc (Feb 27 2013 - 12:13:42)
CPU: AMCC PowerPC 460EX Rev. B at 1000 MHz (PLB=166, OPB=83, EBC=83 MHz)
Security/Kasumi support
Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
Internal PCI arbiter disabled
32 kB I-Cache 32 kB D-Cache
Board: Mellanox PPC460EX Board
FDEF: No
I2C: ready
DRAM: 2 GB (ECC enabled, 333 MHz, CL3)
FLASH: 16 MB
NAND: 1024 MiB
PCI: Bus Dev VenId DevId Class Int
PCIE0: link is not up.
PCIE1: successfully set as root-complex
01 00 15b3 c738 0c06 00
Net: ppc_4xx_eth0, ppc_4xx_eth1
Hit any key to stop autoboot: 0
Waiting for PHY auto negotiation to complete...... TIMEOUT !
done
ENET Speed is 10 Mbps - HALF duplex connection (EMAC0)
Using ppc_4xx_eth0 device
ping failed; host 192.168.138.101 is not alive
Loading Kernel Image ... OK
ABCDE
kernel_pre_init: ISR subsystem initialized, initializing data.
kernel_pre_init: Data initialized, initializing non-driver subsystems.
kernel_pre_init: trace_init done
kernel_pre_init: sh_sheap_init done
kernel_pre_init: locks&sem _init done
kernel_pre_init: profile_init done
Fdrv_table_install: syslog at 0x0003511c with minor 0 (DRV_SETUP) (DRV_INIT)
drv_table_install: isrlog at 0x0003511c with minor 1 (DRV_INIT)
drv_table_install: userinterface at 0x00004db0 with minor 0 (DRV_SETUP) (DRV_INIT)
drv_table_install: stty0 at 0x00070c30 with minor 0 (DRV_SETUP) (DRV_INIT)
drv_table_install: eth0 at 0x000715e4 with minor 0 (DRV_SETUP) (DRV_INIT)
drv_table_install: i2c0 at 0x0007d2ac with minor 0 (DRV_SETUP) (DRV_INIT)
drv_table_install: i2c1 at 0x0007d2ac with minor 1 (DRV_INIT)
drv_table_install: itcpip at 0x0003df70 with minor 0tcpipInit: Starting internal TCP/IP stack.
(DRV_SETUP) (DRV_INIT)
kernel_main: Drivers installed, installing INIT process with stack size = 8192.
sk_init_main: Started @ 3:00:40 4/28/2016
nor_flash_ini_setup: big_flash_lock created
sk_init_main: Starting process based initialization - 8791.
02:60:48:10:ff:78 UDP socket 3 created
TCP socket 4 created
sk_init_main: Process based initialization complete - 8791.
sk_init_main: Installing task table.
task_table_install: console at 0x00016208 stack 0x00512410/26624 : 4
task_table_install: inetd at 0x00036d90 stack 0x00534c10/8192 : 5
task_table_install: poll_cqs at 0x000b52f8 stack 0x00518c10/8192 : 6
task_table_install: poll_ports at 0x000b5660 stack 0x0051ac10/16384 : 7
task_table_install: env_mon at 0x000877bc stack 0x00520c10/8192 : 8
task_table_install: env_bin_api at 0x000148d0 stack 0x00522c10/8192 : 9
task_table_install: incoming_fw_files at 0x00014334 stack 0x00524c10/8192 : 10
task_table_install: incoming_fw_files at 0x00014334 stack 0x00526c10/8192 : 11
task_table_install: wdog at 0x00021cd0 stack 0x00536c10/4096 : 12
sk_init_main: Task table installed. Starting tasks and exiting.
sk_init_main: Enable WatchDog
----------------------------- Board Info -----------------------------
* Chasis Type : DINGO
* Number of Ports : 12
* U-Boot Revision :U-Boot 2009.01 SX_PPC_M460EX SX_3.2.0330-82-EMC ppc (Feb 27 2013 - 12:13:42)
* Firmware Revision : 9.9.1260
* INI file Revision : 0x31010016
----------------------------------------------------------------------
BUILD INFO UTILITY
GET_PROJECT_CVS_COMMIT_LEVEL..=1.383
GET_BUILD_BASE................=
GET_BUILD_SIGNATURE...........=0025b50070be,2014-05-23,10:04:05,34176
GET_BUILD_PATH................=/emc/tdowning/ppc460_release/may_23_2014
03:00:48 04/28/2016
Switch-B(4)>