Howdy y'all,
So I have been fighting with this for a while so I thought I would throw it out here and see if anyone has any ideas. I got a Dell Precision Workstation Tower 7810 from work that was going to be junked. I brought it home and upgraded the CPUs from 2x E5-2603 v3 to 2x E5-2695 v4 that went fine. But I also decided to upgrade the ram from 4x 4GB (MTA9ASF51272PZ) sticks to 4x 16GB (MTA36ASF2G72PZ) sticks. However when I attempt to boot with the 4x 16GB sticks I get no display, no amber LED, but no display out. I have tried a different GPU, I have tried just 1 stick for each CPU in each slot and no luck. I have also tried another 4x 16GB kit (HMA42GR7AFR4N), that did not work either. I can boot just fine if I go back to the 4GB sticks. I am at a bit of a lose on what to do, any thoughts would be great!
So I have been fighting with this for a while so I thought I would throw it out here and see if anyone has any ideas. I got a Dell Precision Workstation Tower 7810 from work that was going to be junked. I brought it home and upgraded the CPUs from 2x E5-2603 v3 to 2x E5-2695 v4 that went fine. But I also decided to upgrade the ram from 4x 4GB (MTA9ASF51272PZ) sticks to 4x 16GB (MTA36ASF2G72PZ) sticks. However when I attempt to boot with the 4x 16GB sticks I get no display, no amber LED, but no display out. I have tried a different GPU, I have tried just 1 stick for each CPU in each slot and no luck. I have also tried another 4x 16GB kit (HMA42GR7AFR4N), that did not work either. I can boot just fine if I go back to the 4GB sticks. I am at a bit of a lose on what to do, any thoughts would be great!