I am using the megaraid_sas.ko kernel module driver that came with the 2.6.37 kernel that I am using. I did not use the WebGUI (nor megaraid manager, nor change anything in the M1015 BIOS). All I did was use FreeDOS and megacli tool to flash the firmware to the Dec 2010 firmware for 9240-8i from LSI's website. I flashed the firmware one card at a time (I have no idea if I could have successfully done more than one at a time)Did you have to install drivers or configure via the WebGUI - or just flash the card with the LSI firmware (and not some IT mode firmware, but just general firmware) and then they are JBOD? We have flashed with the december IBM firmware, but will try LSI firmware if that will work...
Code:
$ modinfo megaraid_sas
filename: /lib/modules/2.6.37-autogroup/kernel/drivers/scsi/megaraid/megaraid_sas.ko
description: LSI MegaRAID SAS Driver
author: megaraidlinux@lsi.com
version: 00.00.04.31-rc1