What's the best way of determining the source of errors that ZFS uncovers?
I'm running FreeNAS 8.3-RELEASE-p5 baremetal on one of the nodes in my C6100. There's a M1015 connected via a SFF8087<->SFF8087 cable to a DAS (Norco with a HP SAS expander in it, chassis 2 in my sig). Is it because I'm using a internal cable outside of the case?
Copied over some data via rsync. Then started a scrub and noticed this on a zpool status.
Using -v I get the object numbers, not file names.
Also, how do you get to smart data on FreeBSD? I don't have to specify -d with smartctl on my Linux system.
I'm running FreeNAS 8.3-RELEASE-p5 baremetal on one of the nodes in my C6100. There's a M1015 connected via a SFF8087<->SFF8087 cable to a DAS (Norco with a HP SAS expander in it, chassis 2 in my sig). Is it because I'm using a internal cable outside of the case?
Copied over some data via rsync. Then started a scrub and noticed this on a zpool status.
Code:
# zpool status
pool: pool
state: ONLINE
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://www.sun.com/msg/ZFS-8000-8A
scan: scrub in progress since Thu Mar 14 08:46:46 2013
22.3G scanned out of 25.3T at 19.4M/s, 380h58m to go
17.1M repaired, 0.09% done
config:
NAME STATE READ WRITE CKSUM
pool ONLINE 0 0 133K
raidz2-0 ONLINE 0 0 270K
gptid/29176c8f-8923-11e2-9141-00266cf27fc0 ONLINE 0 0 0 (repairing)
gptid/299264da-8923-11e2-9141-00266cf27fc0 ONLINE 0 0 0 (repairing)
gptid/29ff11ce-8923-11e2-9141-00266cf27fc0 ONLINE 0 0 1 (repairing)
gptid/2a707282-8923-11e2-9141-00266cf27fc0 ONLINE 0 0 0 (repairing)
gptid/2b19ce97-8923-11e2-9141-00266cf27fc0 ONLINE 0 0 1 (repairing)
gptid/2b821837-8923-11e2-9141-00266cf27fc0 ONLINE 0 0 0 (repairing)
gptid/2bf7de2d-8923-11e2-9141-00266cf27fc0 ONLINE 0 0 0 (repairing)
gptid/2c7476d8-8923-11e2-9141-00266cf27fc0 ONLINE 0 0 1 (repairing)
[B]errors: 188113 data errors, use '-v' for a list[/B]
Code:
errors: Permanent errors have been detected in the following files:
pool:<0x1>
pool:<0x3>
pool:<0x909>
pool:<0x2a14>
Code:
# smartctl -a /dev/mfisyspd0
smartctl 5.43 2012-06-30 r3573 [FreeBSD 8.3-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
/dev/mfisyspd0: Unable to detect device type
Smartctl: please specify device type with the -d option.
Use smartctl -h to get a usage summary