Anyone have luck in using raw ipmitool commands to alter fan speeds on a X9SRL-F with BMC version 3.19. I am trying to use the following ipmitool command to alter fan speeds but it does not work and no error is reported:
ipmitool -I lanplus -H 192.168.1.2 -U ADMIN -P ADMIN raw 0x30 0x91 0x5A 0x3 0x10 0x66
I know that ipmitool is working because I can issue the command:
ipmitool -I lanplus -H 192.168.1.2 -U ADMIN -P ADMIN raw 0x30 0x45 0x01 0x01
and the fan mode changes from standard to full.
I saw these and other commands on posts on this forum and other places and can't get any to work. Anyone have any other ideas?
ipmitool -I lanplus -H 192.168.1.2 -U ADMIN -P ADMIN raw 0x30 0x91 0x5A 0x3 0x10 0x66
I know that ipmitool is working because I can issue the command:
ipmitool -I lanplus -H 192.168.1.2 -U ADMIN -P ADMIN raw 0x30 0x45 0x01 0x01
and the fan mode changes from standard to full.
I saw these and other commands on posts on this forum and other places and can't get any to work. Anyone have any other ideas?