I am having some weird system behavior when deploying nvme on supermicro X9DRi-LN4F motherboard.
Got a few U2 P3700 nvme from Ebay and for some reason I cannot get them all to work at the same time.
All 4 drives are installed on a known working U2 to pci-e adapter that I pulled from an older system that are about to be retired. Anyway during the testing that I did today, it appear that one drive would only work on a specific slot. If I moved the drive around within the 6 slot, sometime it would completely dissapear from the system and sometime it would show up with an exclamation mark (the device cannot start error10).
Intel SSD toolbox shows health 0 (red) and the only way to recover them is to put them back in the slot where it worked before.
Unfortunately I do not have other system to test this on, but I never had this weird behavior in the past working with similar x9 motherboard.
Anyone ever experienced similar problem before ??
Got a few U2 P3700 nvme from Ebay and for some reason I cannot get them all to work at the same time.
All 4 drives are installed on a known working U2 to pci-e adapter that I pulled from an older system that are about to be retired. Anyway during the testing that I did today, it appear that one drive would only work on a specific slot. If I moved the drive around within the 6 slot, sometime it would completely dissapear from the system and sometime it would show up with an exclamation mark (the device cannot start error10).
Intel SSD toolbox shows health 0 (red) and the only way to recover them is to put them back in the slot where it worked before.
Unfortunately I do not have other system to test this on, but I never had this weird behavior in the past working with similar x9 motherboard.
Anyone ever experienced similar problem before ??
Last edited: