Hello,
I just found an old post on reddit about IPMI and iKVM "no signal" issue after boot sequence:
No video output (VGA & IPMI KVM) after boot : homelab
I have the exact (at least similar) same issue, but some times it works...
e.g: not working when boot up the server, but many days after when I want to do some maintenance on server, it works (totally random)
I tried iKVM Reset / Unit reset / reboot server but still the same issue.
IPMI Firmware Revision: 01.56 Redfish Version: 1.0.1
CPLD Version: 02.b1.02
BIOS 2.2 (will try last BIOS 2.2a tonight)
Mobo: X11SSH-F
Proc: Xeon E3 1275 v6
I need to keep i915 driver, because I use it to hw transcode.
I think it's not working after the load of i915 driver, but i can't understand why I can't get both working and why sometimes it works...
I need:
i915 for hw transcode
ASPEED 2400 for iKVM redirection
Does anyone have any suggestions ?
Thank you !
Sorry for my English, not my native language.
I just found an old post on reddit about IPMI and iKVM "no signal" issue after boot sequence:
No video output (VGA & IPMI KVM) after boot : homelab
I have the exact (at least similar) same issue, but some times it works...
e.g: not working when boot up the server, but many days after when I want to do some maintenance on server, it works (totally random)
I tried iKVM Reset / Unit reset / reboot server but still the same issue.
IPMI Firmware Revision: 01.56 Redfish Version: 1.0.1
CPLD Version: 02.b1.02
BIOS 2.2 (will try last BIOS 2.2a tonight)
Mobo: X11SSH-F
Proc: Xeon E3 1275 v6
I need to keep i915 driver, because I use it to hw transcode.
I think it's not working after the load of i915 driver, but i can't understand why I can't get both working and why sometimes it works...
I need:
i915 for hw transcode
ASPEED 2400 for iKVM redirection
Does anyone have any suggestions ?
Thank you !
Sorry for my English, not my native language.