x10slh-f Watchdog disable

[Letzki]

Hello guys,

I have a problem with my new motherboard.
It will Hard REset my server. I have freenas 9.10 U3 installede.
Yesterday i took out the jumper for the Watchdog, that should mean disabled? Also checked the BIOS and there its disabled. But i keeps Hard Restting.

IPMI Log.
2017/05/05 22:12:34OEMAC Power OnAC Power On - Assertion
22017/05/05 22:12:50Chassis IntruPhysical Security (Chassis Intrusion)General Chassis Intrusion - Assertion
2017/05/06 07:43:52#0xcaWatchdog 2Timer Interrupt - Assertion
2017/05/06 07:43:53#0xcaWatchdog 2Hard Reset - Assertion
2017/05/07 01:28:09#0xcaWatchdog 2Timer Interrupt - Assertion
2017/05/07 01:28:10#0xcaWatchdog 2Hard Reset - Assertion

Any ideas?
Thanks in advance.

 

[Letzki]

I now tryede to create a tunable with the variable watchdogd_eanble and the value to NO. in a rc.conf type.

That did help on not getting the hard resets in the IPMI log, but it still resets.

I will now try and reinstall Freenas.

 

[Letzki]

So I tried to reinstall Freenas, and I though i was lucky. But after around 45 hours it reset again.

Any Ideas? I think it might be min PSU, it does some tricks on my. If i take out the power cable, I can´t plug it in right away. I need to wait 5-10 mins before it will power on again. This is not something new, it have always done this.

So my next attempt is to install windows on a ssd and let it run, and see if there is any problems there.