EU WTB Dual Socket SP3 2U Server (EPYC Milan) + 7543 / 75F3 CPUs + NVMe SSDs/ HDD

[Derk]

Looking to buy:


1. Dual Socket SP3 2U (or 1U) Server / Barebone

• Preferably Supermicro, Gigabyte, or ASRock Rack
• Good condition, with proper cooling and rails
• Looking for H12DSU / H12DSL or similar dual socket boards

2. CPUs (optional but preferred)

• 2x EPYC 7543 / 75F3 (or similar high base clock Milan CPUs)
• Pair preferred

3. 4TB NVMe Datacenter SSDs

• Looking for 4TB enterprise NVMe (PM9A3, 9200 Pro, P5310, etc.)
• minimum 2TB (if you have some in bulk), larger / bigger ssd's always welcome
• and perhaps some 15-20TB HDD's if you have a couple in bulk

Budget depends on condition and specs. Please send photos, full specs, and price.


Pickup in Netherlands possible, shipping also fine.


Send me your offers!

 

[hrgiger]

I have got (CZ) 2 of single socket R272-Z34 + MZ32-AR0 + 256Gb 3200 ECC Registered 2Rx8 with 7713p in good shape (homelab), havent decided yet but thinking to selling one of them, each has same spec :

Server R272 2U S-SP3(240W), 2GbE, 12LFF/24+2SFF, 2M.2, IPMI,16DDR4-3200,7PCI-E8(g4), rPS (80+ PLATINUM) semifinished

2U Single Socket barebone for AMD EPYC 7002/7003 (Rome/Milan) (SP3 LGA) 240W 16DIMM, max.4TB DDR4 3200MHz ECC RDIMMs 2× PCI-Express ×16 g4 (half height, half length) 1× PCI-Express × 16 g4 (half height, half length) 1× PCI-Express ×16 with ×8 g4 signal (half height, half length) 1× PCI-Express × 16 g3 (half height, half length) 1× PCI-Express × 16 g3 OCP 2.0 slot (Type1, P1, P2, P3, P4) Intel® i350 Dual Port Gigabit Ethernet LAN Connected 4× sATA 2.5" hotswap on the motherboard, another 20 positions are not connected, without hotswap frames. It is not equipped with an SAS3 expander. Plugged 2× sATA 2.5" hotswap on the back (on the motherboard) 2× M.2 2242/2260/2280 (NVMe PCI-E4) Front I/O ports: 2× USB 3.0 Rear I/O ports: 3× USB 3.0 IPMI 2.0 with KVM and own LAN 1200W Redundant Power Supply with High Efficiency Platinum Level Fitted with motherboard MZ32-AR0

8	ks	32GB 3200MHz DDR4 ECC Registered 2R×8, LP(31mm), Samsung (M393A4G43AB3-CWE)
1	ks	Intel i350-AM2 2× GbE network card on the basic board
1	ks	Aspeed AST2500
1	ks	-
2	ks	Kioxia SSD CD6-R 3,84TB NVMe U.2 (2.5"/15mm), PCI-E4g4, 1000/60kIOPS, BiCS TLC, 1DWPD, SIE KCD6XLUL3T84
	PCIe® Gen3 ×4 interface with single port support NVMeTM 1.3a compliant Up to 550K random read IOPS in single port (1×E4) mode Low power consumption with 13W maximum 2.5 inch form factor, 15 mm Z-Height Power loss protection and end-to-end data protection Sanitize Instant Erase (SIE) option - The Sanitize Instant Erase (SIE) support option Crypto Erase, which is a standardized feature defined by NVM Express Inc. 5-year limited warrant
1	ks	IPMI 2.0 module with KVM-over-LAN on motherboard
	Full-fledged IPMI module incl. KVM-over-Ether and Virtual Media over LAN. Full control of the system from the moment of switching on. Integrated on the motherboard. Dedicated LAN for IPMI, can be used for IPMI operation LAN1.
1	ks	Redundant Source
1	ks	8NVMe & 16SFF & 2rearSFF, 4PCI-E16(g4)/3PCI-E16(g4)+2PCI-E8(g3), all-LP, w/o SAS3 exp.

 

[Derk]

I have got (CZ) 2 of single socket R272-Z34 + MZ32-AR0 + 256Gb 3200 ECC Registered 2Rx8 with 7713p in good shape (homelab), havent decided yet but thinking to selling one of them, each has same spec :

Server R272 2U S-SP3(240W), 2GbE, 12LFF/24+2SFF, 2M.2, IPMI,16DDR4-3200,7PCI-E8(g4), rPS (80+ PLATINUM) semifinished

2U Single Socket barebone for AMD EPYC 7002/7003 (Rome/Milan) (SP3 LGA) 240W 16DIMM, max.4TB DDR4 3200MHz ECC RDIMMs 2× PCI-Express ×16 g4 (half height, half length) 1× PCI-Express × 16 g4 (half height, half length) 1× PCI-Express ×16 with ×8 g4 signal (half height, half length) 1× PCI-Express × 16 g3 (half height, half length) 1× PCI-Express × 16 g3 OCP 2.0 slot (Type1, P1, P2, P3, P4) Intel® i350 Dual Port Gigabit Ethernet LAN Connected 4× sATA 2.5" hotswap on the motherboard, another 20 positions are not connected, without hotswap frames. It is not equipped with an SAS3 expander. Plugged 2× sATA 2.5" hotswap on the back (on the motherboard) 2× M.2 2242/2260/2280 (NVMe PCI-E4) Front I/O ports: 2× USB 3.0 Rear I/O ports: 3× USB 3.0 IPMI 2.0 with KVM and own LAN 1200W Redundant Power Supply with High Efficiency Platinum Level Fitted with motherboard MZ32-AR0

8	ks	32GB 3200MHz DDR4 ECC Registered 2R×8, LP(31mm), Samsung (M393A4G43AB3-CWE)
1	ks	Intel i350-AM2 2× GbE network card on the basic board
1	ks	Aspeed AST2500
1	ks	-
2	ks	Kioxia SSD CD6-R 3,84TB NVMe U.2 (2.5"/15mm), PCI-E4g4, 1000/60kIOPS, BiCS TLC, 1DWPD, SIE KCD6XLUL3T84
	PCIe® Gen3 ×4 interface with single port support NVMeTM 1.3a compliant Up to 550K random read IOPS in single port (1×E4) mode Low power consumption with 13W maximum 2.5 inch form factor, 15 mm Z-Height Power loss protection and end-to-end data protection Sanitize Instant Erase (SIE) option - The Sanitize Instant Erase (SIE) support option Crypto Erase, which is a standardized feature defined by NVM Express Inc. 5-year limited warrant
1	ks	IPMI 2.0 module with KVM-over-LAN on motherboard
	Full-fledged IPMI module incl. KVM-over-Ether and Virtual Media over LAN. Full control of the system from the moment of switching on. Integrated on the motherboard. Dedicated LAN for IPMI, can be used for IPMI operation LAN1.
1	ks	Redundant Source
1	ks	8NVMe & 16SFF & 2rearSFF, 4PCI-E16(g4)/3PCI-E16(g4)+2PCI-E8(g3), all-LP, w/o SAS3 exp.

I am looking for dual socket 2U, can't take this i'm sorry

 

[michel333]

I am looking for dual socket 2U, can't take this i'm sorry

Did you find something? I have Dual epyc 7663 cpu with supermicro motherboard.
I can add ram and nvme.

 

[Derk]

Did you find something? I have Dual epyc 7663 cpu with supermicro motherboard.
I can add ram and nvme.

would like to have something with a minimum 2.8 hz base clock so the 7663 wouldn't do
need it to be a bit more snappy

 

[michel333]

would like to have something with a minimum 2.8 hz base clock so the 7663 wouldn't do
need it to be a bit more snappy

It boost to 3.5 ghz so it is not bad cpu in performance. It depends of your workload if needs base clock or boost clock works too.

 

[knightrider309]

Hi, I have the following available:

- Supermicro AS-1024US-TRT 1U with H12DSU-iN board (no rails) - might be able to add them
- 2x AMD EPYC 7543 unlocked Milan (2.8GHz base, 32c/64t)
- 2x Samsung PM9A3 3.84TB U.2 NVMe PCIe Gen4

All in good condition. DM me if still looking.

 

[Derk]

Hi, I have the following available:

- Supermicro AS-1024US-TRT 1U with H12DSU-iN board (no rails) - might be able to add them
- 2x AMD EPYC 7543 unlocked Milan (2.8GHz base, 32c/64t)
- 2x Samsung PM9A3 3.84TB U.2 NVMe PCIe Gen4

All in good condition. DM me if still looking.

this is exactly what i need DMS

 

[Derk]

still searching bump