Windows 2012 r2 installation issues

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

alex1002

Member
Apr 9, 2013
519
19
18
Good day,
I got my new server today. And having some serious issue ever. Windows 2012 r2 installation reboots at about 50%. I tried to install windows 2012 r2 on non raid drives works fine.

SYS-5018R-M
Supermicro X10SRi-F
Supermicro | Products | Motherboards | Xeon® Boards | X10SRi-F
E5-1.6ghz
32gb ddr4
Intel controller with four drives in raid10
Updated to latest bios. Windows see the raid perfectly fine and begins installing to it with
No issues
Latest bios

I also can't understand the difference between ssata and Sata In the bios


Sent from my iPhone using Tapatalk
 
Last edited:

pricklypunter

Well-Known Member
Nov 10, 2015
1,708
515
113
Canada
General troubleshooting should at the least rule out any obvious hardware problems. Cables are all connected fully? Re-seat RAM, Expansion cards etc? Have you run some disk tests to rule out a duff disk? Rule out your hardware first, especially if the server has just been shipped to you. Often things get jiggled about in transit loosening cables, screws, modules and cards etc, heavy bumping around can damage disks too :)