Which PCIe x16 riser card fits the Lenovo M910x Tiny and supports the Intel I350-T4 NIC

[good4y0u]

Hi all,
As the title suggests I am trying to figure out which PCIe x16 riser card fits the Lenovo M910x Tiny and supports the Intel I350-T4 NIC.

If anyone here has done this before I'd be very interested.

Here are the types I am aware of so far:
*What I do know is none of these brackets ('baffles') fit the m910x, and I am trying to find a 4 port nic baffle. I am also working on 3d printing one.

Model	Image	Latch Type	Link
01AJ940		Push-to-lock (white latch arm)	Pardon Our Interruption...
01AJ940 (another version?)		Push clip (black)	Pardon Our Interruption...
01AJ902		Snap/slide clip (black tab)	Pardon Our Interruption...
01AJ902 (another version?)		Push clip (black)	Pardon Our Interruption...
01AJ900		Push clip	01AJ900 - Taisol C tiny2 pcie riser car Shop for 01AJ900 Taisol C tiny2 pcie riser car LenovoPartSource.com - www.lenovopartsource.com

I found this post, however it covers only the later generations. https://forums.servethehome.com/ind...project-tinyminimicro-reference-thread.34925/

 

[serialintruder]

i bought a 01AJ940 from ali.

01AJ940
this version is advertised for both generations what i think is wrong. on other sources this number is for tiny 5 versions only.

got a Nvida Quadro 620 to boot and work. 3 different PCIe to NVME Adapter wont boot the system any more. i get stuck even before accessing Bios is possible.

ordered a 01AJ902 Tiny 4 Board from ebay to counter check if the adapters are running.

a A+E key Adapter to NVME on the wifi slot is running. this is a crazy construct:
A+E to NVME
There is enough space to fit it under the riser Card with GPU. it is touching parts, but not conductive metals. maybe i use tape to seperate surfaces.
this slot is not fast, but maybe i use it just for the boot drive.