WD 2TB M.2 SATA and Proliant X170R Gen 10

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

seang86s

Member
Feb 19, 2013
164
16
18
Hi everyone. I'm trying to install a couple of these SATA SSDs into the built in M.2 riser on a Proliant X170R node for an ESXi datastore. It works and is recognized, but after a few minutes of operation, iLO5 reports that sensor 60 (AHCI HD) reports a high temp situation and the server shuts down. I can disable that behavior but the fans still ramp up to 100%.

I happen to have an old 1TB Transcend M.2 SATA SSD and interestingly enough, that doesn't trigger a high temp alarm. Also, the original 240 Gig HPe SATA SSD (which are Micron 5300 SSDs) also work fine of course.

Anyone have a suggestion on a workaround?
 

usbTypeD

New Member
Apr 2, 2020
26
12
3
Did you mean to post this in the "Great Deals" section? Move your post to the appropiate section to get more attention and an answer to your question.
 

seang86s

Member
Feb 19, 2013
164
16
18
Whoops. Thought I was in the storage forum. I see it's already been moved. Sorry about that.