VRM modify ICC_MAX to run high TDC OEM cpu

[RolloZ170]

I DIY a heat sink with two independent fans that do not interfere with each other. Each heat sink can hold up to 300W CPU power

ok, good luck and have fun.

 

[surnboy]

 

[Zhengrankela]

I DIY a heat sink with two independent fans that do not interfere with each other. Each heat sink can hold up to 300W CPU power

To change the setting to the OScontrol at the bmc

 

[surnboy]

To change the setting to the OScontrol at the bmc
[/引用]
Is this it? I searched through all the menus and only found this one

 

[Zhengrankela]

true

 

[surnboy]

Okay, thank you. I'll give it a try

 

[青菜321]

Hello blogger, your article is quite professional. I have a motherboard X11DPT-B here, could you please help me modify the BIOS to support 205W power consumption

 

[RolloZ170]

I have a motherboard X11DPT-B here, could you please help me modify the BIOS to support 205W power consumption

i do not BIOS modd here.

 

[青菜321]

X11dpt-b no Automatic Programming Could you please add Rollo

 

[RolloZ170]

X11dpt-b no Automatic Programming Could you please add Rollo

i do not support "Automatic Programming"
find the two addresses of the VRM controller:
"MCP2221a_iccmax_FF.exe -scan 10 7F"
and use the cmd to update ICC_MAX
"MCP2221a_iccmax_FF.exe -<VRMtype> 58 60"
where VRM type is on e of the following:
TPS53679
TPS53678
MP2955A
PXE1610C
and replace 58 and 60 with addresses of your findings.

 

[abeasley]

Has anyone had any luck with the HPE ML350 Gen10? I've searched be board briefly for the proper pins without any luck.

 

[瑾上添花]

@罗洛Z170
Supermicro X11DPi 主板执行命令 MCP2221a_iccmax_FF.exe -MP2955A 20 不成功 引导麻烦是什么原因

 

[surnboy]

Scan the address first

@罗洛Z170
Supermicro X11DPi 主板执行命令 MCP2221a_iccmax_FF.exe -MP2955A 20 不成功 引导麻烦是什么原因

 

[surnboy]

Scan the address first

MCP2221a_iccmax_FF.exe -scan 20 7F REM scan from addr 20 to 7F

 

[瑾上添花]

MCP2221a_iccmax_FF.exe -scan 20 7F REM 扫描从 addr 20 到 7F
[/引用]

 

[瑾上添花]

MCP2221a_iccmax_FF.exe -scan 20 7F REM 扫描从 addr 20 到 7F
[/引用]
您能帮我看看问题出在哪里吗？

 

[RolloZ170]

mainboard off. wrong connection. no CPUs installed....

 

[瑾上添花]

mainboard off. wrong connection. no CPUs installed....

Now on 2 CPUs this appears ...

 

[RolloZ170]

Now on 2 CPUs this appears ...

mainboard off. wrong connection.

 

[瑾上添花]

主板关闭。连接错误。
[/引用]