I used standard Cisco serial cable with RJ45 to DB9F adapter.
Connect to local terminal
Terminal Mode: VT-100
Baud: 38400
Parity: No Parity
Stop Bits: 1 Stop Bit
Flow Control: None
User name: admin/123456
To configure the FTP server
Enter the following commands:
1. admin
Enter the admin mode. The default password for the admin user is 123456
2. config
Enter the config mode (from admin mode).
3. remote
Access the Remote Mode (from the config mode)
4. server [ip]
Configure the IPv4 or IPv6 address of the Remote server.
5. username [username]
Configure the user name for Remote server access and press enter.
6. password
Set the user password to access the Remote server. Press Enter and then enter the password.
7. protocol set [FTP]
Set the protocol to access remote server.
8. remote show
To verify configuration
I used following upgrade path to get 3.91.
upgrade from 2.0 to 2.1
upgrade from 2.1 to 3.0
upgrade from 3.0 to 3.1
upgrade from 3.1 to 3.62
upgrade from 3.62 to 3.91
For the firmware images, I used firmware from HP. See links from howlym's posting
http://forums.servethehome.com/netw...tware-version-voltaire-2036-can-upgraded.html
Remote FTP server, I used free FileZillad FTP server. There might be a difference for the file name when upload different versions. If the default file name upgrade_all.tgz does not work, make sure verify the log see what the file name it's asking for.
(000001)6/28/2013 10:36:40 AM - (not logged in) (192.168.30.244)> 220-FileZilla Server version 0.9.41 beta
(000001)6/28/2013 10:36:40 AM - (not logged in) (192.168.30.244)> 220-written by Tim Kosse (Tim.Kosse@gmx.de)
(000001)6/28/2013 10:36:40 AM - (not logged in) (192.168.30.244)> 220 Please visit FileZilla | Free Communications software downloads at SourceForge.net
(000001)6/28/2013 10:36:40 AM - (not logged in) (192.168.30.244)> USER 4036
(000001)6/28/2013 10:36:40 AM - (not logged in) (192.168.30.244)> 331 Password required for 4036
(000001)6/28/2013 10:36:40 AM - (not logged in) (192.168.30.244)> PASS ******
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> 230 Logged on
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> SYST
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> 215 UNIX emulated by FileZilla
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> PWD
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> 257 "/" is current directory.
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> TYPE I
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> 200 Type set to I
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> SIZE upgrade_all.tgz
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> 213 99175529
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> PASV
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> 227 Entering Passive Mode (192,168,30,21,218,97)
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> RETR upgrade_all.tgz
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> 150 Connection accepted
(000001)6/28/2013 10:36:43 AM - 4036 (192.168.30.244)> 226 Transfer OK
Software and firmware update procedure
update command:update software chassis
verify command:module-firmware show
you should see SW version as 3.9.1 and firmware version as 7.4.22
Connect to local terminal
Terminal Mode: VT-100
Baud: 38400
Parity: No Parity
Stop Bits: 1 Stop Bit
Flow Control: None
User name: admin/123456
To configure the FTP server
Enter the following commands:
1. admin
Enter the admin mode. The default password for the admin user is 123456
2. config
Enter the config mode (from admin mode).
3. remote
Access the Remote Mode (from the config mode)
4. server [ip]
Configure the IPv4 or IPv6 address of the Remote server.
5. username [username]
Configure the user name for Remote server access and press enter.
6. password
Set the user password to access the Remote server. Press Enter and then enter the password.
7. protocol set [FTP]
Set the protocol to access remote server.
8. remote show
To verify configuration
I used following upgrade path to get 3.91.
upgrade from 2.0 to 2.1
upgrade from 2.1 to 3.0
upgrade from 3.0 to 3.1
upgrade from 3.1 to 3.62
upgrade from 3.62 to 3.91
For the firmware images, I used firmware from HP. See links from howlym's posting
http://forums.servethehome.com/netw...tware-version-voltaire-2036-can-upgraded.html
Remote FTP server, I used free FileZillad FTP server. There might be a difference for the file name when upload different versions. If the default file name upgrade_all.tgz does not work, make sure verify the log see what the file name it's asking for.
(000001)6/28/2013 10:36:40 AM - (not logged in) (192.168.30.244)> 220-FileZilla Server version 0.9.41 beta
(000001)6/28/2013 10:36:40 AM - (not logged in) (192.168.30.244)> 220-written by Tim Kosse (Tim.Kosse@gmx.de)
(000001)6/28/2013 10:36:40 AM - (not logged in) (192.168.30.244)> 220 Please visit FileZilla | Free Communications software downloads at SourceForge.net
(000001)6/28/2013 10:36:40 AM - (not logged in) (192.168.30.244)> USER 4036
(000001)6/28/2013 10:36:40 AM - (not logged in) (192.168.30.244)> 331 Password required for 4036
(000001)6/28/2013 10:36:40 AM - (not logged in) (192.168.30.244)> PASS ******
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> 230 Logged on
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> SYST
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> 215 UNIX emulated by FileZilla
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> PWD
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> 257 "/" is current directory.
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> TYPE I
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> 200 Type set to I
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> SIZE upgrade_all.tgz
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> 213 99175529
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> PASV
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> 227 Entering Passive Mode (192,168,30,21,218,97)
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> RETR upgrade_all.tgz
(000001)6/28/2013 10:36:40 AM - 4036 (192.168.30.244)> 150 Connection accepted
(000001)6/28/2013 10:36:43 AM - 4036 (192.168.30.244)> 226 Transfer OK
Software and firmware update procedure
update command:update software chassis
verify command:module-firmware show
you should see SW version as 3.9.1 and firmware version as 7.4.22