VM Host - Build Recommendations

[psuet]

Hi,

For a project of a non-profit, I need two new VM Hosts (KVM).

Chassis: 1HE / 2HE (> 4 2.5" (or 3.5") Slots), Redundant Power

CPU: Power / Heat is not a primary concern, 1 Socket Systems are preferred, but if yields are better with 2 CPUs, I'm okay with that.

RAM: These hosts don't require an absurd amount of RAM; 96 GB per Host should be sufficient. DDR4 prefered

Networking: Onboard 10G Ethernet AND / OR PCIe x8 Slot.

I have no problem with used/refurbished hardware or building the Server myself. Service etc. is not required.

Budget ~ 2000€ / 2500 US$ (per Server)

Do you have any recommendations for Servers or a Base Plattform to use?

Do you have feedback regarding any of the specs?

Thanks!

 

[LodeRunner]

Refurb Dell R720 or R730 from eBay? Can easily get the 2x 1gb/2x10gb rndc's from eBay as well. Those are dual socketed but can be run as single.

 

[Connorise]

Take 1U refurb SuperMicro or Dell. SM has pure single socket systems with wide options for networking that built-in in chassis as well as you may use any RAID controller, memory and disks that not really certified with the server but still will work with 99% sure. But Dell is very cool with great firmware and server components reliability.

 

[MrGuvernment]

What is going to be the work load on this/these servers?