Ubiquiti Beta US-16-XG $299

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

DaSaint

Active Member
Oct 3, 2015
282
79
28
Colorado
Anyone else having connection issues? Since my gigabyte pesh-2 is connected on 10gbit (2x x540) connection keeps dropping. Need to restart the server to get it up again, so think a board issue?
I would be interested in knowing more about this i do have one of these boards in one of my ESXi Hosts, but havent gotten the time to hook the switch into it as of yet... did you try swapping cables/firmware etc?
 

JwTvH

Member
Mar 10, 2016
31
2
8
44
i've tried swapping ports. 14 and 16 where working (did run for 24hrs +), but got some issues again after trying something else. Also got problems getting connection back after removing cables. Don't have many cat7 to try with, most are too short. Do run controller 5.5.1, don't know if 5.4.8 is better?
 

tby

Active Member
Aug 22, 2013
222
111
43
Snellville, GA
set-inform.com
There's a whole thread on problems with Intel 10GBase-T cards linked in the first post. Latest from UBNT is that they might have test firmware out to address this by end of February -- a slight improvement from their previous estimate of maybe Q1.
 

JwTvH

Member
Mar 10, 2016
31
2
8
44
Thanks, i missed this link. Gives some clarification :(, hope new firmware is released soon then..
 
  • Like
Reactions: Hal
Dec 30, 2016
106
24
18
44
Frustrating that my Cisco 3M TwinAx cables won't work with this. Appears to be a firmware issue because when I reboot the switch my hosts auto-negotiate and come up at 10Gb, then shortly after they're back down once the switch is fully booted.
 

acmcool

Banned
Jun 23, 2015
610
76
28
40
Woodbury,MN
I am having trouble getting trunk port working. I created a trunk port on my dell 6224 and created a network with correct tagged vlan id's on ubiquiti. The trunk port on ubiquiti side is in blocked status. Any ideas to resolve it?
 

whitey

Moderator
Jun 30, 2014
2,766
868
113
41
Picked one of these up as a favor for forum member @doup93 since he's in Canada and they wont ship there and didn't want to use a forwarded or try to play trickery w/ pymt info. I'll ship across the border when it arrives.
 
  • Like
Reactions: doup93

maxermaxer

Active Member
Oct 28, 2016
288
48
28
48
Picked one of these up as a favor for forum member @doup93 since he's in Canada and they wont ship there and didn't want to use a forwarded or try to play trickery w/ pymt info. I'll ship across the border when it arrives.
Very nice of you! I live in Hong Kong and I ordered one a few days ago by using a shipto service. Got refunded. What a pity!
 

whitey

Moderator
Jun 30, 2014
2,766
868
113
41
Now to solve this riddle, I am logged in w/ my beta acct but sure as hell cannot find the controller sw, looking for the .deb based package for V5.4.6? Saw a link earlier in thread but it didn't work for me, gave me this garbage.

upload_2017-1-12_8-48-53.png
 

PigLover

Moderator
Jan 26, 2011
3,184
1,545
113
Go to the ubiquiti forums. In the switching and routing Beta page. There is a sticky with the links to the pre-release controller software.

Sent from my SM-G925V using Tapatalk
 

wildchild

Active Member
Feb 4, 2014
389
57
28
So use the manual update procedure to update to the wanted firmware.
I have been running 5.5.0 for some time now, and found to run very well and stable in my env.
Waiting for the next 5.5.x as 5.5.1 does have some troublesome issues
 

doup93

New Member
Feb 26, 2013
23
3
3
Thank you very much for the help getting me the switch @whitey (and the X520-DA2's ;)). Can't wait to get all of these.

This forum is starting to get expensive for me.
 

Peanuthead

Active Member
Jun 12, 2015
839
177
43
44
Looks like it is dead. If someone wants to unload one give me a gingle. Sucker was $299 and checking out the final total doubled.
 

Dean

Member
Jun 18, 2015
116
10
18
48
Store is currently off line for US based customers

Sent from my SM-G935T using Tapatalk