Nope it goes from BMC straight to The Intel Boot Agent which gets stuck on my machine and even if it succeeds I never got to the bios.the BMC (onboard VGA) should work thought ?
Nope it goes from BMC straight to The Intel Boot Agent which gets stuck on my machine and even if it succeeds I never got to the bios.the BMC (onboard VGA) should work thought ?
you are on a AMD platform ?Nope it goes from BMC straight to The Intel Boot Agent
i bet AfuEfix64 does not accept a modified BIOS.I might just mod the bios to have CSM default disabled so it never happens again.
Yup and it flashes everything without validation!i bet AfuEfix64 does not accept a modified BIOS.
is there a BIOS flash function in the BMC WebGUI ?
tyan must be the only motherboard without BIOS access over 15pin VGA with fatcory settings (CSM on) then, strange.Yes im on an AMD platform but this driver is a PXE boot thingy from the onboard Intel nic.
how got you BMC access without BIOS access to create a user ?Yes im on an AMD platform but this driver is a PXE boot thingy from the onboard Intel nic.
I already had access I upgraded from Rome and everything was set up. Yeah well I cleared CMOS multiple times and removed the battery but it kept loading in old-school CSM mode.how got you BMC access without BIOS access to create a user ?
BIOS defaults of 4.04 are very inconsistent, Secure Boot is enabled Failsafe,
in that case CSM should not be active even if enabled.
yes i see now, in BIOS V4.04 are two BIOS, Rome and Milan with diff.default settingsI already had access I upgraded from Rome and everything was set up. Yeah well I cleared CMOS multiple times and removed the battery but it kept loading in old-school CSM mode.
Crazy right? Sadly the board is EOL so I doubt they will fix it. I chased 4.04 for months until it got released. I wonder why it just hangs with CSM on Milan though.yes i see now, in BIOS V4.04 are two BIOS, Rome and Milan with diff.default settings
Rome BIOS: Sec.Boot: enabled/disabled (failsave/optimal)
Milan BIOS: Sec.Boot: enabled/enabled (failsave/optimal)
Are you running 4.04 on the rev 1.0 of the motherboard? (ie the one with the 32MB BMC chip) ?Crazy right? Sadly the board is EOL so I doubt they will fix it. I chased 4.04 for months until it got released. I wonder why it just hangs with CSM on Milan though.
Nope on the 64MB version, and I don't think it's CSM after all, it might be something else in the failsafe values that take effect after a bios update etc.Are you running 4.04 on the rev 1.0 of the motherboard? (ie the one with the 32MB BMC chip) ?
RDIMM non ECC exists in theory, but nobody makes this today.But the kingston site says it doesnt work - i guess because its not ECC?
I got 8x 32gb RDIMM of Micron 36ASF4G72PZ-3G2J3 that is on the compatibility list over 2-years ago and paid in the neighborhood of $80/module. I got some on eBay and some off ServerMonkey. Checking today and those same modules are going for $250+. Sorry.Hi All, buyiing this board in a few days. Can anyone recommend memory and the cheapest place to find it?
I found this ::
Kingston 16GB PC4 3200MHz Server RDIMM RAM 2Rx8 KSM32RD8/16HDR
But the kingston site says it doesnt work - i guess because its not ECC?
i guess the Hynix D die with 'R'ambus RCD does not work good with EPYC and they do not recommend.I found this ::
Kingston 16GB PC4 3200MHz Server RDIMM RAM 2Rx8 KSM32RD8/16HDR
But the kingston site says it doesnt work - i guess because its not ECC?
KSM32RD8/16HDR is EOLBut the kingston site says it doesnt work