Tyan S5512WGM2NR: No m1015 WebBIOS? - SOLVED
As stated, Tyan S5512WGM2NR with the IBM m1015 card (new MB; fleabay card; I’ve got 4; tried all 4). When booting, I get into the LSI MegaRAID BIOS screen and press Ctrl-H for the WebBIOS. Quickly, a line appears “WebBIOS will be executed after POST completesâ€; the American Megatrends post screen is displayed; then a blank screen with a flashing cursor. I’ve left it like that for 15 minutes without it going any further, before I recycle the server.
The attached drives are being recognized by WHS v1 without a problem (passthrough).
Recommendations?
While I did not find any help in IBM's documentation; I found this in LSI’s manual:
Suggestions?
Thanks,
Lippy
As stated, Tyan S5512WGM2NR with the IBM m1015 card (new MB; fleabay card; I’ve got 4; tried all 4). When booting, I get into the LSI MegaRAID BIOS screen and press Ctrl-H for the WebBIOS. Quickly, a line appears “WebBIOS will be executed after POST completesâ€; the American Megatrends post screen is displayed; then a blank screen with a flashing cursor. I’ve left it like that for 15 minutes without it going any further, before I recycle the server.
The attached drives are being recognized by WHS v1 without a problem (passthrough).
Recommendations?
While I did not find any help in IBM's documentation; I found this in LSI’s manual:
This MB does not have a PS2 port; and I can’t find a setting in the MB BIOS that resembles this.NOTE: On systems that do not have the PS2 port, you must enable 'port 60/64
emulation' in the System BIOS to emulate USB as PS2. When this option is disabled on
this system, WebBIOS does not work.
Suggestions?
Thanks,
Lippy
Last edited: