I should do something about this? If so what.
This is in a modified Fractal S6 USB - not anything interesting, just removed the top and front, the radiator support (cause it's not using one) and the vertical decorative plate near the hard drives. It has AMD 3700X, 6 traditional hard drives(4 sas, 2 sata), both nvme drives (smoll ones) and a sata ssd. One lsi based 8i hba controller. Three 140mm case fans and a noctua 12 series cooler.
After assembling, I ran it for a few days here - temps were ok at all of the other thermometers (< 40C and some <30C) but like at 55C for the 10G networking. Was concerned cause I could only test at 1G. Took it to it's real site, introduced it to its new friends and plugged it up to a decent 10G switch and without doing much at all, networking temp went to 65C, everything else is good and maybe 2C different than it was.
This is in a modified Fractal S6 USB - not anything interesting, just removed the top and front, the radiator support (cause it's not using one) and the vertical decorative plate near the hard drives. It has AMD 3700X, 6 traditional hard drives(4 sas, 2 sata), both nvme drives (smoll ones) and a sata ssd. One lsi based 8i hba controller. Three 140mm case fans and a noctua 12 series cooler.
After assembling, I ran it for a few days here - temps were ok at all of the other thermometers (< 40C and some <30C) but like at 55C for the 10G networking. Was concerned cause I could only test at 1G. Took it to it's real site, introduced it to its new friends and plugged it up to a decent 10G switch and without doing much at all, networking temp went to 65C, everything else is good and maybe 2C different than it was.
Attachments
-
124.7 KB Views: 23