Toptop n100 6x 2.5gbps minipc stability problems BKHD - 1264NP-12-6l

[ichbinpete]

Hi all, I've been looking to see if there is a bios update or good settings to get this minipic to be stable.

- tried 2 different corsair sticks, both 16gb - 1 came with it, the other is vengeance
- Bios is GF 1264NP126LV11R003
- will reboot if I am in bios for extending time; have to make changes save restart...rinse and repeat

I've also tried lowering pl1 and pl2 and had no luck.

 

[ichbinpete]

Or, I think I'm reading that the board likely comes from cwwk - anyone used one of the bios from their download site for this 6 link board? 畅网官方网盘

 

[bugacha]

whats not stable exactly ?

 

[ichbinpete]

It wasn't stable at all, would reset when adjusting bios, lock up when booted to proxmox, etc. I tried replacing the ram and had same result. I was able to get an updated bios from an a vendor on amazon who has the 6 NIC n100 topton like device. It's been 100% stable ever since.

I had not bought from that vendor but they listed they had bios available for their mini pcs, so I just asked them if they could give me a download. They sent me a site very much like the one I posted above, but in 100% english so it was very very easy to get to the bios I needed. Happy to share the vendor, as they seem to provide good/quick support if it's allowed. - Glovary