Threadripper with a Wraith Ripper in a 4U chassis?

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
Helzy

Helzy

Active Member
Oct 19, 2017
190
60
28
56
Looking at a Rosewill L-4500 or equivalent 4U server chassis to house a 2nd gen 2950X and a wraith ripper. I know the Wraith ripper is 6.3 inches tall so that leaves .7 inches or about 17mm for the standoffs and height of the proc on the mobo. Wondering if anyone at Servethehome has attempted this?

Thanks!
 
Helzy

Helzy

Active Member
Oct 19, 2017
190
60
28
56
Sorry yes I did, I built two of them. One of which is collecting dust. Too bad it would be really expensive to ship, I'd gladly part with one of them
 
Helzy

Helzy

Active Member
Oct 19, 2017
190
60
28
56
nabsltd said:
How'd you use that heatsink in a 4U chassis? I've never found any cooler taller than 150mm (5.9") that would fit in a 4U.
Click to expand...
Sorry I didn't end up using the Wraith Rippers I used Noctua's I have a brand new Wraith Ripper sitting here collecting dust. Sad I know. ONly one is in production, the other is unused but racked. I'll see if I can take some pics. Here sometime soon
 
You must log in or register to reply here.
Top Bottom