Thermal Imaging on reviews

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

MiniKnight

Well-Known Member
Mar 30, 2012
3,072
973
113
NYC
Hello Rangeley: Image #7 (yes the first one I had the lens cover on):



Still a bit of a learning curve, much moreso than a DSLR. The above was with a Supermicro A1SRi-2758F. I think the MSX enhancement is going to be useful.
Your thermal image looks off. The hot spots seem not to be in the correct places.
 

Patrick

Administrator
Staff member
Dec 21, 2010
12,511
5,792
113
Great point. You are 100% right there and basically it comes down to a bit of calibration. I will say that I am much better at this after just a few days.
 

mrkrad

Well-Known Member
Oct 13, 2012
1,244
52
48
probably binning, if you had a poor sensor for 320x240 you could just drop the resolution enough to cover it.

so is the image camera 2mp and the sensor 320x240? or how does that work?

btw what's the exact model on that E4? the 80x60 9hz with MSX model that is retail $995?

I'm pretty sure I resell those so I might have to get demo pricing on one.
 
Last edited: