Teradici PCoIP zeroclient 6.0 firmware

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

gr8ape

Member
Jun 15, 2015
42
4
8
Anyone know where I can find this? It appears to have been moved behind a paywall. Do they offer NFR or any other way to obtain it?

Thanks!
 

Rand__

Well-Known Member
Mar 6, 2014
6,626
1,767
113
I think they have an eval option.
Also you still can get older versions for free and I have not seen a real reason to move to 6.0 yet

Still considering the intro offer which is not too bad for a single client..
 

gr8ape

Member
Jun 15, 2015
42
4
8
I invested in PCoIP because they are talking about supporting 4k remote workstation / zero client. But then I discovered they have moved to a paywall. :(

There remote workstation access plan is not worthwhile for a homelab.
 

Rand__

Well-Known Member
Mar 6, 2014
6,626
1,767
113
Yeah I agree with you.
Otoh I am not convinced yet that they will support 4K with current gen (tera2) HW.
They didn't want to answer that question despite me asking several times...
 

Rand__

Well-Known Member
Mar 6, 2014
6,626
1,767
113
So they finally announced 4K support - anyone ever been able to find a place where one could get an updated version for a ... test?
 
  • Like
Reactions: markpower28

Rand__

Well-Known Member
Mar 6, 2014
6,626
1,767
113
So tried buying one... but they have a minimum 5 license policy now...

Does anyone know whether subselling these is legal? Might try to buy one then... or sell 4 to whoever needs one at cost...

This is quite annoying for home use :(
 

Rand__

Well-Known Member
Mar 6, 2014
6,626
1,767
113
Anyone with access to v 20.x that might be able to share?

Also - just in case you havent seen it - there were some serious secuity issues in the 5.x line which is now fixed in 17.5/.1 (available for free (registration))
 
  • Like
Reactions: gr8ape

gr8ape

Member
Jun 15, 2015
42
4
8
Yes... I am looking for the ability to test the new firmware. Anyone know where I may find it?

Thanks!
 

nk215

Active Member
Oct 6, 2015
412
143
43
49
I have tera2 firmware 5.5.2. I didn't install it yet since I have no need for it. Anyone can download 5.5.2. It's the 6.x that's behind the paywall.
 
Last edited:
  • Like
Reactions: Rand__

Rand__

Well-Known Member
Mar 6, 2014
6,626
1,767
113
I think 5.5.2 is older than the 17.5.0/1 they released in between to fix a security issue.
That one was available all registered users due to its security aspect, the others are for paying customers only due to new features...
 
  • Like
Reactions: nk215

nk215

Active Member
Oct 6, 2015
412
143
43
49
I think 5.5.2 is older than the 17.5.0/1 they released in between to fix a security issue.
That one was available all registered users due to its security aspect, the others are for paying customers only due to new features...
How about 17.05.4? I have that also.
 

Rand__

Well-Known Member
Mar 6, 2014
6,626
1,767
113
Sure, thanks.
just found out they killed my Teradici account... But of /c they are perfectly happy to send me an advertising email once a week.
 

Rand__

Well-Known Member
Mar 6, 2014
6,626
1,767
113
Great thanks - you happen to have the one for the workstation card too?
 

Rand__

Well-Known Member
Mar 6, 2014
6,626
1,767
113
I found the Firmware 17.05.3 for both Zero Clients and RWC at Leadtek if somebody needs it

Unfortunately they dont have any of the newer versions
 

Rand__

Well-Known Member
Mar 6, 2014
6,626
1,767
113
I assume there is no one who can provide a newer FW at this point?

I was considering moving to a 4K display and thankfully tried an older 4k monitor first on my current setup before hitting the buy button -
it fails to show anything above 2560... which probably is due to the fact that i run @nk215 's 17.05.04 instead of the required 20.01+ which enabled UHD resolution apparently...

Edit - I would actually considering buying All Access but with HPes aquisition it seems like the verison with Remote Desktop Card (CA+) is now 1500 bucks for 5 licenses ... slightly out of my price range...
 
Last edited:

nk215

Active Member
Oct 6, 2015
412
143
43
49
Not sure if you are still looking for this.

I have zero client firmware 20.01 to 20.04, 21.01 to 21.03, and 23.04 if you need it.




I assume there is no one who can provide a newer FW at this point?

I was considering moving to a 4K display and thankfully tried an older 4k monitor first on my current setup before hitting the buy button -
it fails to show anything above 2560... which probably is due to the fact that i run @nk215 's 17.05.04 instead of the required 20.01+ which enabled UHD resolution apparently...

Edit - I would actually considering buying All Access but with HPes aquisition it seems like the verison with Remote Desktop Card (CA+) is now 1500 bucks for 5 licenses ... slightly out of my price range...
 
Last edited: